Any idea what I am doing wrong? Why are the registers too long? jonsmirl@terra:/home/apps/openwrt$ ./staging_dir/toolchain-mipsel_dsp_gcc-4.7.2_uClibc-0.9.33.2/bin/mipsel-openwrt-linux-uclibc-gdb GNU gdb (Linaro GDB) 7.5-2012.12-1 Copyright (C) 2012 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "--host=x86_64-linux-gnu --target=mipsel-openwrt-linux-uclibc". For bug reporting instructions, please see: <http://bugs.launchpad.net/gdb-linaro/>. (gdb) target remote localhost:3333 Remote debugging using localhost:3333 Remote 'g' packet reply is too long: 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 (gdb) show architecture The target architecture is set automatically (currently mips) (gdb)
--------------------------------------------------------------------- jonsmirl@terra:~$ openocd -f interface/olimex-arm-usb-ocd.cfg -f ralink.cfg Open On-Chip Debugger 0.5.0 (2011-12-03-10:15) Licensed under GNU GPL v2 For bug reports, read http://openocd.berlios.de/doc/doxygen/bugs.html Info : only one transport option; autoselect 'jtag' 2000 kHz adapter_nsrst_delay: 100 jtag_ntrst_delay: 100 rt3050.cpu Info : clock speed 2000 kHz Info : JTAG tap: rt3050.cpu tap/device found: 0x1535024f (mfg: 0x127, part: 0x5350, ver: 0x1) Info : accepting 'telnet' connection from 4444 target state: halted target halted in MIPS32 mode due to debug-request, pc: 0x80000204 Info : accepting 'gdb' connection from 3333 Warn : acknowledgment received, but no packet pending Info : dropped 'gdb' connection -- Jon Smirl jonsm...@gmail.com _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
