applied the patch and compiled everything from the start but no change in
boot process
On 1 June 2013 13:55, Hauke Mehrtens <ha...@hauke-m.de> wrote:
> On 06/01/2013 06:24 PM, Tomislav Požega wrote:
> > vlan0ports=5
> > vlan1ports=0 1 2 3 4 5*
> >
> > i have zipped nvram, original firmware boot process and complete flash
> > image in case you might find it useful
>
> Could you try the attached patch.
>
> Hauke
>
> > > Index: target/linux/brcm47xx/base-files/etc/init.d/netconfig
> > > ===================================================================
> > > --- target/linux/brcm47xx/base-files/etc/init.d/netconfig
> (revision
> > > 35832)
> > > +++ target/linux/brcm47xx/base-files/etc/init.d/netconfig
> > (working copy)
> > > @@ -225,6 +225,12 @@
> > > c["vlan1ports"] = ""
> > > c["vlan2ports"] = ""
> > > }
> > > + if (model == "Option GlobeSurfer III") {
> > > + c["lan_ifname"] = "eth0.1"
> > > + c["wan_ifname"] = ""
> > > + c["vlan1ports"] = "0 1 2 3 4 5u"
> > > + c["vlan2ports"] = ""
> > > + }
> >
> > I would more like a generic detection of this switch configuration.
> > Could you please post your nvram values for vlan{0,1,2}ports. When
> these
> > values are containing correct values we could do a generic detection.
> >
> > > if (c["vlan1ports"] || c["vlan2ports"]) {
> > > print "#### VLAN configuration "
>
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
