From: Dmitry Shmygov <shmy...@rambler.ru>
This patch adds support for HAME MPR-A2 router using a DTS file.
The platform is Ralink RT5350.
http://wiki.openwrt.org/toh/hame/mpr-a2
Signed-off-by: Dmitry Shmygov <shmy...@rambler.ru>
---
Index: target/linux/ramips/rt305x/profiles/hame.mk
===================================================================
--- target/linux/ramips/rt305x/profiles/hame.mk (revision 0)
+++ target/linux/ramips/rt305x/profiles/hame.mk (revision 0)
@@ -0,0 +1,21 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/MPRA2
+ NAME:=HAME MPR-A2
+ PACKAGES:=\
+ kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-netdev
kmod-ledtrig-timer \
+ kmod-usb-acm kmod-usb-net kmod-usb-net-asix kmod-usb-net-rndis
kmod-usb-serial kmod-usb-serial-option \
+ usb-modeswitch usb-modeswitch-data comgt
+endef
+
+define Profile/MPRA2/Description
+ Package set for HAME MPR-A2 board
+endef
+
+$(eval $(call Profile,MPRA2))
+
Index: target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips
===================================================================
--- target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips
(revision 36636)
+++ target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips
(working copy)
@@ -6,6 +6,18 @@
. /lib/ramips.sh
ramips_set_preinit_iface() {
+ local board=$(ramips_board_name)
+
+ case "$board" in
+ mpr-a2)
+ #TODO
+ # Ralink ethernet driver cannot re-open ethernet if it is
opened during preinit and then closed.
+ # Looks like Ralink ethernet driver has a problem.
+ # Temporary solution is not to open ethernet during preinit.
+ return 0
+ ;;
+ esac
+
ifname=eth0
}
Index: target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
===================================================================
--- target/linux/ramips/base-files/lib/preinit/06_set_iface_mac (revision 36636)
+++ target/linux/ramips/base-files/lib/preinit/06_set_iface_mac (working copy)
@@ -26,6 +26,7 @@
dir-620-a1 |\
esr-9753 |\
freestation5 |\
+ mpr-a2 | \
nw718 |\
psr-680w |\
rt-n56u |\
Index: target/linux/ramips/base-files/lib/ramips.sh
===================================================================
--- target/linux/ramips/base-files/lib/ramips.sh (revision 36636)
+++ target/linux/ramips/base-files/lib/ramips.sh (working copy)
@@ -112,6 +112,9 @@
*"MoFi Network MOFI3500-3GN")
name="mofi3500-3gn"
;;
+ *"HAME MPR-A2")
+ name="mpr-a2"
+ ;;
*"NBG-419N")
name="nbg-419n"
;;
Index: target/linux/ramips/base-files/lib/upgrade/platform.sh
===================================================================
--- target/linux/ramips/base-files/lib/upgrade/platform.sh (revision 36636)
+++ target/linux/ramips/base-files/lib/upgrade/platform.sh (working copy)
@@ -42,6 +42,7 @@
freestation5 | \
hw550-3g | \
mofi3500-3gn | \
+ mpr-a2 | \
mzk-w300nh2 | \
nbg-419n | \
nw718 | \
Index: target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
===================================================================
--- target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
(revision 36636)
+++ target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
(working copy)
@@ -76,6 +76,7 @@
freestation5 | \
hw550-3g | \
mofi3500-3gn | \
+ mpr-a2 | \
pwh2004 | \
nbg-419n | \
nw718 | \
Index: target/linux/ramips/base-files/etc/uci-defaults/01_leds
===================================================================
--- target/linux/ramips/base-files/etc/uci-defaults/01_leds (revision 36636)
+++ target/linux/ramips/base-files/etc/uci-defaults/01_leds (working copy)
@@ -94,6 +94,9 @@
mofi3500-3gn)
set_usb_led "mofi3500-3gn:green:usb"
;;
+ mpr-a2)
+ set_wifi_led "mpr-a2:blue:system"
+ ;;
mzk-w300nh2)
set_wifi_led "mzkw300nh2:amber:wlan"
;;
Index: target/linux/ramips/base-files/etc/uci-defaults/02_network
===================================================================
--- target/linux/ramips/base-files/etc/uci-defaults/02_network (revision 36636)
+++ target/linux/ramips/base-files/etc/uci-defaults/02_network (working copy)
@@ -172,6 +172,7 @@
broadway | \
dir-620-d1 | \
f5d8235-v1 | \
+ mpr-a2 | \
mzk-w300nh2 | \
nw718 | \
psr-680w | \
Index: target/linux/ramips/base-files/etc/diag.sh
===================================================================
--- target/linux/ramips/base-files/etc/diag.sh (revision 36636)
+++ target/linux/ramips/base-files/etc/diag.sh (working copy)
@@ -55,6 +55,9 @@
mofi3500-3gn)
status_led="mofi3500-3gn:green:status"
;;
+ mpr-a2)
+ status_led="mpr-a2:red:power"
+ ;;
nbg-419n)
status_led="nbg-419n:green:power"
;;
Index: target/linux/ramips/dts/MPRA2.dts
===================================================================
--- target/linux/ramips/dts/MPRA2.dts (revision 0)
+++ target/linux/ramips/dts/MPRA2.dts (revision 0)
@@ -0,0 +1,121 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+ compatible = "MPRA2", "ralink,rt5350-soc";
+ model = "HAME MPR-A2";
+
+ memory@0 {
+ reg = <0x0 0x2000000>;
+ };
+
+ palmbus@10000000 {
+ sysc@0 {
+ ralink,pinmux = "i2c", "spi", "uartlite", "mdio",
"sdram", "rgmii";
+ ralink,gpiomux = "jtag";
+ ralink,uartmux = "gpio";
+ ralink,wdtmux = <1>;
+ };
+
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "s25fl064k";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ status = "okay";
+ };
+
+ esw@10110000 {
+ status = "okay";
+ ralink,portmap = <0x2f>;
+ };
+
+ wmac@10180000 {
+ status = "okay";
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ system {
+ label = "mpr-a2:blue:system";
+ gpios = <&gpio0 20 1>;
+ };
+ power {
+ label = "mpr-a2:red:power";
+ gpios = <&gpio0 17 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ wps {
+ label = "reset";
+ gpios = <&gpio0 0 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb {
+ gpio-export,name = "usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 7 0>;
+ };
+ root_hub {
+ gpio-export,name = "root_hub";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 12 0>;
+ };
+ };
+};
Index: target/linux/ramips/image/Makefile
===================================================================
--- target/linux/ramips/image/Makefile (revision 36636)
+++ target/linux/ramips/image/Makefile (working copy)
@@ -93,7 +93,7 @@
endef
define BuildFirmware/OF/initramfs
- $(call MkImageLzmaDtb,$(2),$(3))
+ $(call MkImageLzmaDtb,$(2),$(3),$(4))
$(CP) $(KDIR)/vmlinux-$(2).uImage $(call imgname,$(1),$(2))-uImage.bin
endef
@@ -113,8 +113,8 @@
# $(2) = lowercase board name
# $(3) = dts file
ralink_default_fw_size_8M=8060928
-BuildFirmware/Default8M/squashfs=$(call
BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_8M))
-BuildFirmware/Default8M/initramfs=$(call
BuildFirmware/OF/initramfs,$(1),$(2),$(3))
+BuildFirmware/Default8M/squashfs=$(call
BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_8M),$(4))
+BuildFirmware/Default8M/initramfs=$(call
BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4))
# Build images for a custom sized flash layout
# $(1) = squashfs/initramfs
@@ -330,6 +330,9 @@
Image/Build/Profile/MOFI3500-3GN=$(call
BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN)
+# Kernel name should be "Linux Kernel Image" to make the OpenWrt image
installable from factory Web UI
+Image/Build/Profile/MPRA2=$(call
BuildFirmware/Default8M/$(1),$(1),mpr-a2,MPRA2,Linux Kernel Image)
+
Image/Build/Profile/NBG-419N=$(call
BuildFirmware/Default4M/$(1),$(1),nbg-419n,NBG-419N)
Image/Build/Profile/MZKW300NH2=$(call
BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2,MZK-W300NH2,$(mzkw300nh2_mtd_size),CSYS,RN52,0x50000,0xc0000)
@@ -456,6 +459,7 @@
$(call Image/Build/Profile/FREESTATION5,$(1))
$(call Image/Build/Profile/HW550-3G,$(1))
$(call Image/Build/Profile/MOFI3500-3GN,$(1))
+ $(call Image/Build/Profile/MPRA2,$(1))
$(call Image/Build/Profile/MZKW300NH2,$(1))
$(call Image/Build/Profile/NBG-419N,$(1))
$(call Image/Build/Profile/NW718,$(1))
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
