Hi, I have a fit-pc2-i http://www.fit-pc.com/web/fit-pc/fit-pc2-i/ with a ADATA 32GB SSD w/ a SATA interface drive built in. Kamikaze boots fine and from scratch, but neither backfire nor attitude adjustment. For them the boot process stops while "waiting for root device /dev/sda2 in both cases. I assume I need to include some additional modules in my firmware, but am unsure which ones and at which level: Can I compile kernel modules kmod* into the image and expect it to work? I thought that kmod models were stored in rootfs and since the system fails to boot before it can even find rootfs. If my assumption is correct I have to compile support directly into the kernel using make kernel_menuconfig Is that correct? And if so, what do i have to include when configuring make kernel_menuconfig and/or make menuconfig to get SATA drive to be recognised as initial and only rootfs? I consulted the extroot page in wiki, but I understand that approach relies on an initial rootfs in the device's flash drive to be present, which then writes its /overlay or / to the external storage; this is not what happens with this fit-pc2-I, which has no flash drive but but only he SATA drive.
Any help and pointers on how to build such a x86 image is appreciated. Thanks Hanno Schupp
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
