---------------
Hi,
Attached please find the bootup console output for the Nokia N810 as
built from the trunk. I hope this can convince somebody to remove
the "broken" flag from the target. If somebody's willing to go have
a look, the suggested patch is at:
https://dev.openwrt.org/ticket/13111
Which removes "broken" and updates the target description.
FWIW, I have now built a console interface for an N810 along the
lines of Michael Buesch's, and would be happy to verify the N810's
operation when the trunk kernel version moves in the future.
Thanks,
Andy Valencia
> NOLO X-Loader (v1.1.16, Oct 31 2008)
> Secondary image size 100656
> Booting secondary
> Nokia OMAP Loader v1.1.16 (Oct 31 2008) running on Nokia N810 LV (RX-44)
> Clocks:
> Core: 658 MHz L3: 109 MHz L4: 109 MHz
> MPU: 329 MHz DSP: 219 MHz IVA: 109 MHz
> I2C v3.4
> Menelaus v2.2 found
> Vilma v1.5 found
> Betty v2.2 found
> Reset reason: pwr_key
> System DMA v2.0
> OneNAND blocks unlocked in 30330 us
> Flash id: ec4021
> Partition table successfully read
> ERROR: Error reading spare of block 36, page 0
> McSPI v1.4
> LM8323 found at bus 1 addr 45
> LP5521 found at bus 1 addr 32
> RFBI version 1.0
> Detecting LCD panel lph8923
> Panel ID: 83815f
> URAL panel detected
> Detected LCD panel: ls041y3
> S1D13745 Hailstorm detected
> FB memory blanking took 242 ms (3089 kB/s)
> Logo drawn in 24 ms (1218 kB/s)
> \ber-cool backlight fade-in took 101 ms
> Initializing USB
> No USB host detected
> Loading kernel image info... done.
> Loading kernel (1473 kB)... done in 75 ms (19605 kB/s)
> Total bootup time 795 ms
> Uncompressing Linux... done, booting the kernel.
> [ 0.000000] Booting Linux on physical CPU 0
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 3.3.8 (vandys@k9) (gcc version 4.6.4 20121210
> (prerelease) (Linaro GCC 4.6-2012.12) ) #3 PREEMPT Wed Feb 27 10:57:51 PST
> 2013
> [ 0.000000] CPU: ARMv6-compatible processor [4107b362] revision 2
> (ARMv6TEJ), cr=00e5387d
> [ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
> [ 0.000000] Machine: Nokia N810
> [ 0.000000] Memory policy: ECC disabled, Data cache writeback
> [ 0.000000] OMAP2420
> [ 0.000000]
> [ 0.000000] Clocking rate (Crystal/DPLL/MPU): 19.2/658/329 MHz
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
> pages: 32512
> [ 0.000000] Kernel command line: root=/dev/mmcblk0p1
> rootfstype=ext4,ext3,ext2,squashfs,jffs2 console=tty0 console=ttyO2,115200n8
> earlyprintk
> [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
> [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
> [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
> [ 0.000000] Memory: 128MB = 128MB total
> [ 0.000000] Memory: 125352k/125352k available, 5720k reserved, 0K highmem
> [ 0.000000] Virtual kernel memory layout:
> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
> [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
> [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
> [ 0.000000] .text : 0xc0008000 - 0xc03d5804 (3895 kB)
> [ 0.000000] .init : 0xc03d6000 - 0xc03fb000 ( 148 kB)
> [ 0.000000] .data : 0xc03fc000 - 0xc04200e0 ( 145 kB)
> [ 0.000000] .bss : 0xc0420104 - 0xc0471c80 ( 327 kB)
> [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0,
> CPUs=1, Nodes=1
> [ 0.000000] NR_IRQS:440 nr_irqs:440 440
> [ 0.000000] IRQ: Found an INTC at 0xfa0fe000 (revision 2.0) with 96
> interrupts
> [ 0.000000] Total of 96 interrupts on 1 active controller
> [ 0.000000] Nokia N-series HWMOD_INIT_NO_RESET workaround enabled
> [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
> [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every
> 131071999ms
> [ 0.000000] Console: colour dummy device 80x30
> [ 0.000000] console [tty0] enabled
> [ 0.001922] Calibrating delay loop... 327.68 BogoMIPS (lpj=1277952)
> [ 0.054748] pid_max: default: 32768 minimum: 301
> [ 0.055450] Mount-cache hash table entries: 512
> [ 0.056488] CPU: Testing write buffer coherency: ok
> [ 0.057220] Setting up static identity map for 0x802e85f0 - 0x802e864c
> [ 0.058990] devtmpfs: initialized
> [ 0.066131] print_constraints: dummy:
> [ 0.067260] NET: Registered protocol family 16
> [ 0.067474] GPMC revision 2.0
> [ 0.074462] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
> [ 0.074737] OMAP GPIO hardware version 1.8
> [ 0.075653] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
> [ 0.076721] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
> [ 0.077789] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
> [ 0.082611] omap_mux_init: Add partition: #1: core, flags: 3
> [ 0.091552] N8x0 MIPID config loaded
> [ 0.091644] N8x0 Blizzard initializedUSB: hmc 16, usb0 6 wires, Mini-AB on
> usb0
> [ 0.119781] TUSB 6010
> [ 0.141448] OMAP DMA hardware revision 2.0
> [ 0.183898] bio: create slab <bio-0> at 0
> [ 0.188812] SCSI subsystem initialized
> [ 0.195739] omap_i2c omap_i2c.1: bus 1 rev1.3.4 at 400 kHz
> [ 0.197631] omap_i2c omap_i2c.2: bus 2 rev1.3.4 at 400 kHz
> [ 0.204223] tahvo tahvo: Betty v2.2 found
> [ 0.206359] retu retu: Vilma v1.5 found
> [ 0.217346] Switching to clocksource 32k_counter
> [ 0.290771] NET: Registered protocol family 2
> [ 0.291320] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
> [ 0.292114] TCP established hash table entries: 4096 (order: 3, 32768
> bytes)
> [ 0.292541] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
> [ 0.292816] TCP: Hash tables configured (established 4096 bind 4096)
> [ 0.292877] TCP reno registered
> [ 0.292968] UDP hash table entries: 256 (order: 0, 4096 bytes)
> [ 0.293060] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
> [ 0.293853] NET: Registered protocol family 1
> [ 0.349731] squashfs: version 4.0 (2009/01/31) Phillip Lougher
> [ 0.351959] JFFS2 version 2.2 (NAND) (SUMMARY) (ZLIB) (LZO) (LZMA) (RTIME)
> (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
> [ 0.355316] msgmni has been set to 244
> [ 0.357879] io scheduler noop registered
> [ 0.358123] io scheduler cfq registered (default)
> [ 0.361389] omapfb: ls041y3 rev 81 LCD detected, 24 data lines
> [ 0.361907] omapfb: configured for panel ls041y3
> [ 0.367340] omapfb: DISPC version 2.0 initialized
> [ 0.367523] omapfb: RFBI version 1.0 initialized
> [ 0.389831] omapfb: s1d13745 LCD controller rev 1 initialized (CNF pins 3)
> [ 0.390045] omapfb omapfb: s1d1374x: setting update mode to auto
> [ 0.446350] Console: switching to colour frame buffer device 100x30
> [ 0.467376] omapfb: Framebuffer initialized. Total vram 770048 planes 1
> [ 0.474884] omapfb: Pixclock 21940 kHz hfreq 24.9 kHz vfreq 51.0 Hz
> [ 0.484436] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> [ 0.499176] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 0) is a OMAP UART0
> [ 0.509063] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP
> UART1
> [ 0.518798] omap_uart.2: ttyO2 at MMIO 0x4806e000 (irq = 74) is a OMAP
> UART2
> [ 1.049713] console [ttyO2] enabled
> [ 1.065734] omap_rng omap_rng: OMAP Random Number Generator ver. 40
> [ 1.117645] brd: module loaded
> [ 1.148590] loop: module loaded
> [ 1.161407] Menelaus rev 2.2
> [ 1.191741] OneNAND driver initializing
> [ 1.204193] omap2-onenand omap2-onenand: initializing on CS0, phys base
> 0x04000000, virtual base c88c0000, freq 66 MHz
> [ 1.231231] Muxed OneNAND 256MB 1.8V 16-bit (0x40)
> [ 1.244171] OneNAND version = 0x0121
> [ 1.257263] Scanning device for bad blocks
> [ 1.271789] OneNAND eraseblock 36 is an initial bad block
> [ 1.331237] OneNAND eraseblock 690 is an initial bad block
> [ 1.370452] OneNAND eraseblock 1060 is an initial bad block
> [ 1.403472] OneNAND eraseblock 1342 is an initial bad block
> [ 1.434143] OneNAND eraseblock 1590 is an initial bad block
> [ 1.480133] Creating 5 MTD partitions on "omap2-onenand":
> [ 1.493164] 0x000000000000-0x000000020000 : "bootloader"
> [ 1.510833] 0x000000020000-0x000000080000 : "config"
> [ 1.528259] 0x000000080000-0x000000280000 : "kernel"
> [ 1.545593] 0x000000280000-0x000000680000 : "initfs"
> [ 1.563079] 0x000000680000-0x000010000000 : "rootfs"
> [ 1.582672] TSC2301 driver initializing
> [ 1.595184] mousedev: PS/2 mouse device common for all mice
> [ 1.669952] input: Internal keyboard as /devices/virtual/input/input0
> [ 1.689392] input: TSC2005 touchscreen as
> /devices/platform/omap/omap2_mcspi.1/spi_master/spi1/spi1.0/input/input1
> [ 1.720184] i2c /dev entries driver
> [ 1.740417] input: retu-pwrbutton as /devices/virtual/input/input2
> [ 1.765258] input: retu-headset as
> /devices/platform/cbus/retu/retu-headset/input/input3
> [ 1.785675] platform mpu.0: omap_cpu_init: cpu0: failed creating freq
> table[-22]
> [ 1.801544] cpuidle: using governor ladder
> [ 1.813323] cpuidle: using governor menu
> [ 1.825866] sdhci: Secure Digital Host Controller Interface driver
> [ 1.840301] sdhci: Copyright(c) Pierre Ossman
> [ 2.056396] OMAP-mmc: waiting for cards...
> [ 2.077758] mmci-omap mmci-omap.0: command timeout (CMD52)
> [ 2.091400] mmci-omap mmci-omap.0: command timeout (CMD52)
> [ 2.110382] mmci-omap mmci-omap.0: command timeout (CMD5)
> [ 2.123474] mmci-omap mmci-omap.0: command timeout (CMD5)
> [ 2.136535] mmci-omap mmci-omap.0: command timeout (CMD5)
> [ 2.149261] mmci-omap mmci-omap.0: command timeout (CMD5)
> [ 2.361236] mmc0: host does not support reading read-only switch. assuming
> write-enable.
> [ 2.376831] mmc0: new SDHC card at address 8fe4
> [ 2.391357] mmcblk0: mmc0:8fe4 SU08G 7.40 GiB
> [ 2.421813] mmcblk0: p1 p2
> [ 2.515502] mmci-omap mmci-omap.0: command timeout (CMD52)
> [ 2.528961] mmci-omap mmci-omap.0: command timeout (CMD52)
> [ 2.547546] mmci-omap mmci-omap.0: command timeout (CMD8)
> [ 2.560699] mmci-omap mmci-omap.0: command timeout (CMD5)
> [ 2.572875] mmci-omap mmci-omap.0: command timeout (CMD5)
> [ 2.585845] mmci-omap mmci-omap.0: command timeout (CMD5)
> [ 2.597778] mmci-omap mmci-omap.0: command timeout (CMD5)
> [ 2.610504] mmci-omap mmci-omap.0: command timeout (CMD5)
> [ 2.621978] mmci-omap mmci-omap.0: command timeout (CMD5)
> [ 2.634002] mmci-omap mmci-omap.0: command timeout (CMD5)
> [ 2.645660] mmci-omap mmci-omap.0: command timeout (CMD55)
> [ 2.656341] mmci-omap mmci-omap.0: command timeout (CMD55)
> [ 2.667755] mmci-omap mmci-omap.0: command timeout (CMD55)
> [ 2.678802] mmci-omap mmci-omap.0: command timeout (CMD55)
> [ 2.689727] mmci-omap mmci-omap.0: command timeout (CMD55)
> [ 2.740722] mmc1: new high speed MMC card at address 0001
> [ 2.753753] mmcblk1: mmc1:0001 000000 1.87 GiB
> [ 2.769165] mmcblk1: p1
> [ 2.784088] sdhci-pltfm: SDHCI platform and OF driver helper
> [ 2.794708] omap_sham_mod_init: loading omap-sham driver
> [ 2.804534] omap_sham_mod_init: Unsupported cpu
> [ 2.813476] omap_aes_mod_init: loading omap-aes driver
> [ 2.823242] omap_aes_mod_init: Unsupported cpu
> [ 2.834320] TCP cubic registered
> [ 2.852569] NET: Registered protocol family 10
> [ 2.868682] NET: Registered protocol family 17
> [ 2.878356] Registering the dns_resolver key type
> [ 2.887908] VFP support v0.3: implementor 41 architecture 1 part 20
> variant b rev 2
> [ 2.901092] mux: Failed to setup hwmod io irq -22
> [ 2.915527] Power Management for OMAP2 initializing
> [ 2.925323] PRCM revision 1.0
> [ 2.935607] input: slide as /devices/virtual/input/input4
> [ 2.951019] input: kb_lock as /devices/virtual/input/input5
> [ 2.964904] clock: disabling unused clocks to save power
> [ 2.976440] Bootup reason: pwr_key
> [ 2.985748] OMAP GPIO switch handler initializing
> [ 3.012878] gpio-switch: required switch not found (-1, cam_act)
> [ 3.025756] gpio-switch: required switch not found (-1, cam_turn)
> [ 3.038421] slide (GPIO 110) is now closed
> [ 3.049011] kb_lock (GPIO 102) is now open
> [ 3.059570] headphone (GPIO 107) is now disconnected
> [ 3.132781] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 3.148651] VFS: Mounted root (ext4 filesystem) on device 179:1.
> [ 3.172729] devtmpfs: mounted
> [ 3.184783] Freeing init memory: 148K
> - preinit -
> Press the [f] key and hit [enter] to enter failsafe mode
> - regular preinit -
> [ 19.980926] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
> [ 21.046295] usbcore: registered new interface driver usbfs
> [ 21.062255] usbcore: registered new interface driver hub
> [ 21.077911] usbcore: registered new device driver usb
> [ 21.161437] Initializing USB Mass Storage driver...
> [ 21.176147] usbcore: registered new interface driver usb-storage
> [ 21.189849] USB Mass Storage support registered.
> - init -
>
> Please press Enter to activate this console. [ 42.905517] retu-n810bm
> retu-n810bm: Requesting CAL BME PMM block firmware file n810-cal-bme-pmm.fw
> [ 43.230346] Compat-drivers backport release: compat-drivers-2013-01-08-3
> [ 43.271209] Backport based on wireless-testing.git master-2013-01-07
> [ 43.292541] compat.git: wireless-testing.git
> [ 43.565032] retu-n810bm retu-n810bm: Not charging battery
> [ 43.582489] retu-n810bm retu-n810bm: Battery management initialized
> [ 43.622192] cfg80211: Calling CRDA to update world regulatory domain
> [ 43.711639] cfg80211: World regulatory domain updated:
> [ 43.783508] cfg80211: (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp)
> [ 43.877258] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
> 2000 mBm)
> [ 43.965362] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
> 2000 mBm)
> [ 44.040985] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
> 2000 mBm)
> [ 44.097717] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
> 2000 mBm)
> [ 44.139373] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
> 2000 mBm)
> [ 44.508056] PPP generic driver version 2.4.2
> [ 44.893737] ieee80211 phy0: p54 detected a LM20 firmware
> [ 44.910705] p54: rx_mtu reduced from 3240 to 2376
> [ 44.923675] ieee80211 phy0: FW rev 2.13.0.0.a.13.14 - Softmac protocol 5.6
> [ 44.939239] ieee80211 phy0: cryptographic accelerator WEP:YES, TKIP:YES,
> CCMP:YES
> [ 45.210754] p54spi spi2.0: loading user eeprom...
> [ 45.226989] ieee80211 phy0: hwaddr 00:02:ee:c0:ff:ee, MAC:isl3820
> RF:Longbow
> [ 45.282714] p54spi spi2.0: is registered as 'phy0'
> [ 45.528808] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 46.015594] retu-n810bm retu-n810bm: Detected 1500 mAh battery
> [ 46.284301] NET: Registered protocol family 24
> [ 46.397003] nf_conntrack version 0.5.0 (1960 buckets, 7840 max)
> [ 47.792694] musb_hdrc: Unknown symbol usb_add_gadget_udc (err 0)
> [ 47.809387] musb_hdrc: Unknown symbol usb_del_gadget_udc (err 0)
> [ 48.321594] usbcore: registered new interface driver cdc_ether
> [ 48.418243] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet
> driver
> [ 48.437866] usbcore: registered new interface driver pegasus
> [ 48.533264] usbcore: registered new interface driver rndis_host
> [ 48.640502] usbcore: registered new interface driver usbhid
> [ 48.654449] usbhid: USB HID core driver
> [ 48.789825] Bluetooth: Core ver 2.16
> [ 48.804229] NET: Registered protocol family 31
> [ 48.816497] Bluetooth: HCI device and connection manager initialized
> [ 48.831085] Bluetooth: HCI socket layer initialized
> [ 48.843688] Bluetooth: L2CAP socket layer initialized
> [ 48.856384] Bluetooth: SCO socket layer initialized
> [ 48.954833] Bluetooth: RFCOMM TTY layer initialized
> [ 48.968017] Bluetooth: RFCOMM socket layer initialized
> [ 48.980957] Bluetooth: RFCOMM ver 1.11
> [ 49.069793] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 49.083007] Bluetooth: BNEP filters: protocol multicast
> [ 49.173828] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
> [ 49.266754] Bluetooth: HCI UART driver ver 2.2
> [ 49.278961] Bluetooth: HCI H4 protocol initialized
> [ 49.373657] usbcore: registered new interface driver btusb
> [ 49.465789] hci_h4p hci_h4p: Registering HCI H4P device
> [ 50.166717] hci_h4p hci_h4p: bd_address packet found
> [ 71.055999] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 78.505065] wlan0: authenticate with 00:12:17:03:fd:d5
> [ 78.552490] wlan0: send auth to 00:12:17:03:fd:d5 (try 1/3)
> [ 78.602478] wlan0: authenticated
> [ 78.633911] p54spi spi2.0: wlan0: disabling HT as WMM/QoS is not supported
> by the AP
> [ 78.673034] p54spi spi2.0: wlan0: disabling VHT as WMM/QoS is not
> supported by the AP
> [ 78.718658] wlan0: associate with 00:12:17:03:fd:d5 (try 1/3)
> [ 78.767364] wlan0: RX AssocResp from 00:12:17:03:fd:d5 (capab=0x411
> status=0 aid=2)
> [ 78.833251] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> [ 78.847961] wlan0: associated
>
>
>
> BusyBox v1.19.4 (2013-02-21 14:33:40 PST) built-in shell (ash)
> Enter 'help' for a list of built-in commands.
>
> _______ ________ __
> | |.-----.-----.-----.| | | |.----.| |_
> | - || _ | -__| || | | || _|| _|
> |_______|| __|_____|__|__||________||__| |____|
> |__| W I R E L E S S F R E E D O M
> -----------------------------------------------------
> BARRIER BREAKER (Bleeding Edge, r35729)
> -----------------------------------------------------
> * 1/2 oz Galliano Pour all ingredients into
> * 4 oz cold Coffee an irish coffee mug filled
> * 1 1/2 oz Dark Rum with crushed ice. Stir.
> * 2 tsp. Creme de Cacao
> -----------------------------------------------------
> root@OpenWrt:/#
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
