Error in using another MDIO (AP123 platform using only one GE1 device
for eth0 and eth1) for the router mr3420v2.
Сonfirmed: https://forum.openwrt.org/viewtopic.php?pid=194779#p194779
Routers in this sense are the same and the only difference is: USB
port, USB led, instead of the GPIO-switch we have GPIO-button.
Signed-off-by: Dmytro <dioptimi...@gmail.com>
---
Index: target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
===================================================================
--- target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
(revision
36006)
+++ target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
(working copy)
@@ -136,6 +136,8 @@
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
+ ath79_register_mdio(1, 0x0);
+
ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
@@ -164,8 +166,6 @@
ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL,
ARRAY_SIZE(tl_wr841n_v8_gpio_keys),
tl_wr841n_v8_gpio_keys);
-
- ath79_register_mdio(1, 0x0);
}
MIPS_MACHINE(ATH79_MACH_TL_WR841N_V8, "TL-WR841N-v8", "TP-LINK
TL-WR841N/ND v8",
@@ -182,8 +182,6 @@
ARRAY_SIZE(tl_mr3420v2_gpio_keys),
tl_mr3420v2_gpio_keys);
- ath79_register_mdio(0, 0x0);
-
/* enable power for the USB port */
gpio_request_one(TL_MR3420V2_GPIO_USB_POWER,
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
