Hi, I've tested current AA on om2p-hs and it lockups the system completly after every boot:
[ 9.220000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993 [ 9.230000] Backport based on wireless-testing.git master-2012-09-07 .. snip .. [ 9.940000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47 .. snip .. [ 9.950000] cfg80211: Calling CRDA for country: US .. snip .. [ 19.250000] device wlan0 entered promiscuous mode [ 19.310000] br-lan: port 1(wlan0) entered forwarding state [ 19.320000] br-lan: port 1(wlan0) entered forwarding state [ 19.420000] ------------[ cut here ]------------ [ 19.420000] WARNING: at /opt/devel/openwrt-adael/openwrt/build_dir/linux-ar71xx_generic/compat-wireless-2012-09-07/drivers/net/wireless/ath/ath9k/hw.c:795 ar9003_get_pll_sqsum_dvc+0x90/0x108 [ath9k_hw]() [ 19.440000] Modules linked in: ath79_wdt ledtrig_netdev ledtrig_heartbeat ledtrig_gpio nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp xt_HL xt_hl xt_ecn ipt_ECN xt_CLASSIFY xt_time xt_tcpmss xt_statistic xt_mark xt_length xt_DSCP xt_dscp xt_string xt_layer7 ipt_MASQUERADE iptable_nat nf_nat xt_recent xt_helper xt_connmark xt_connbytes xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables gpio_dev ifb tun ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) ts_fsm ts_bm ts_kmp cfg80211(O) compat(O) arc4 aes_generic wprobe(O) crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O) [ 19.510000] Call Trace: [ 19.510000] [<8026a40c>] dump_stack+0x8/0x34 [ 19.520000] [<80071dac>] warn_slowpath_common+0x78/0xa4 [ 19.520000] [<80071df0>] warn_slowpath_null+0x18/0x24 [ 19.530000] [<83103738>] ar9003_get_pll_sqsum_dvc+0x90/0x108 [ath9k_hw] [ 19.530000] [<8316b1b0>] ath_hw_pll_work+0x40/0xd4 [ath9k] [ 19.540000] [<80086250>] process_one_work+0x21c/0x3b0 [ 19.540000] [<80086d14>] worker_thread+0x22c/0x334 [ 19.550000] [<8008a654>] kthread+0x88/0x90 [ 19.550000] [<80064c20>] kernel_thread_helper+0x10/0x18 [ 19.560000] [ 19.560000] ---[ end trace 185d14cc0f660afe ]--- [ 19.570000] ath: phy0: PLL4 meaurement not done .. snipped like 50+ of such lines .. [ 34.660000] ath: phy0: PLL4 meaurement not done (here it hangs and waits for a watchdog timeout) I wonder if it's a known problem or if I'm the only one affected (I couldn't find anything like this in the Trac). Thanks. -- ynezz _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
