2013/2/7 Hauke Mehrtens <[email protected]>: > I assume the switch driver you are using is broken. I do not get some of > my devices to work with the bgmac driver + BCM53125 at all. After some > modifications to the switch driver I was able to transmit some packages > but did not receive anything. I do not want to invest many efforts in > the old switch driver that's the reason I want to get a separate phy > driver and use the b53 switch driver any try this out or fix it if > necessary. I assume your problem is also related to the switch.
As said above, I disabled switch drivers to analyze "pure" bgmac first. > Did you apply the patches I added to OpenWrt [0] and send for linux > mainline kernel inclusion? They are needed to make bridge the switch > interface, otherwise you get the problems described in this ticket [1]. > > [0]: https://dev.openwrt.org/changeset/35507 Of course. > [1]: https://dev.openwrt.org/ticket/12927 I don't have or load any WiFi driver. -- Rafał _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
