From: Alexander Stadler <sa.mailli...@univie.ac.at>
kernel support for dir-825-c1
Signed-off-by: Alexander Stadler <sa.mailli...@univie.ac.at>
---
diff -urN a/trunk/target/linux/ar71xx/config-3.7
b/trunk/target/linux/ar71xx/config-3.7
--- a/trunk/target/linux/ar71xx/config-3.7 2012-12-31 19:36:34.000000000
+0100
+++ b/trunk/target/linux/ar71xx/config-3.7 2013-01-07 19:53:10.000000000
+0100
@@ -38,6 +38,7 @@
CONFIG_ATH79_MACH_DIR_600_A1=y
CONFIG_ATH79_MACH_DIR_615_C1=y
CONFIG_ATH79_MACH_DIR_825_B1=y
+CONFIG_ATH79_MACH_DIR_825_C1=y
CONFIG_ATH79_MACH_EAP7660D=y
CONFIG_ATH79_MACH_EW_DORIN=y
CONFIG_ATH79_MACH_HORNET_UB=y
diff -urN
a/trunk/target/linux/ar71xx/patches-3.7/610-MIPS-ath79-openwrt-machines.patch
b/trunk/target/linux/ar71xx/patches-3.7/610-MIPS-ath79-openwrt-machines.patch
---
a/trunk/target/linux/ar71xx/patches-3.7/610-MIPS-ath79-openwrt-machines.patch
2012-12-31 19:36:34.000000000 +0100
+++
b/trunk/target/linux/ar71xx/patches-3.7/610-MIPS-ath79-openwrt-machines.patch
2013-01-07 20:04:27.000000000 +0100
@@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -16,22 +16,112 @@
+@@ -16,22 +16,113 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
@@ -26,6 +26,7 @@
+ ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
+ ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */
+ ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
++ ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */
+ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
+ ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router
Platform */
+ ATH79_MACH_EAP7660D, /* Senao EAP7660D */
@@ -216,7 +217,7 @@
config ATH79_MACH_PB44
bool "Atheros PB44 reference board"
select SOC_AR71XX
-@@ -68,6 +148,488 @@ config ATH79_MACH_PB44
+@@ -68,6 +148,499 @@ config ATH79_MACH_PB44
Say 'Y' here if you want your kernel to support the
Atheros PB44 reference board.
@@ -343,6 +344,17 @@
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
++config ATH79_MACH_DIR_825_C1
++ bool "D-Link DIR-825 rev. C1 board support"
++ select SOC_AR934X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+config ATH79_MACH_EW_DORIN
+ bool "embedded wireless Dorin Platform support"
+ select SOC_AR933X
@@ -767,7 +779,7 @@
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,71 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
+@@ -38,9 +38,72 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
#
# Machines
#
@@ -787,6 +799,7 @@
+obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
+obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
+obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
++obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o
+obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
+obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
+obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
diff -urN a/trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c
b/trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c
--- a/trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c
1970-01-01 01:00:00.000000000 +0100
+++ b/trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c
2013-01-20 22:40:32.000000000 +0100
@@ -0,0 +1,199 @@
+/*
+ * D-Link DIR-825 rev. C1 board support
+ *
+ * Copyright (C) 2013 Alexander Stadler
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define DIR825C1_GPIO_LED_BLUE_USB 11
+#define DIR825C1_GPIO_LED_ORANGE_POWER 15
+#define DIR825C1_GPIO_LED_BLUE_POWER 14
+//#define DIR825C1_GPIO_LED_BLUE_WPS 27
+#define DIR825C1_GPIO_LED_ORANGE_PLANET 19
+#define DIR825C1_GPIO_LED_BLUE_PLANET 18
+
+#define DIR825C1_GPIO_BTN_RESET 17
+#define DIR825C1_GPIO_BTN_WPS 16
+
+//#define DIR825C1_GPIO_USB_POWER 26
+
+#define DIR825C1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DIR825C1_KEYS_DEBOUNCE_INTERVAL (3 *
DIR825C1_KEYS_POLL_INTERVAL)
+
+#define DIR825C1_MAC0_OFFSET 0x4
+#define DIR825C1_MAC1_OFFSET 0x18
+#define DIR825C1_WMAC_CALDATA_OFFSET 0x1000
+#define DIR825C1_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led dir825c1_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:blue:usb",
+ .gpio = DIR825C1_GPIO_LED_BLUE_USB,
+ .active_low = 1,
+ }, {
+ .name = "d-link:orange:power",
+ .gpio = DIR825C1_GPIO_LED_ORANGE_POWER,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:power",
+ .gpio = DIR825C1_GPIO_LED_BLUE_POWER,
+ .active_low = 1,
+// }, {
+// .name = "d-link:blue:wps",
+// .gpio = DIR825C1_GPIO_LED_BLUE_WPS,
+// .active_low = 1,
+ }, {
+ .name = "d-link:orange:planet",
+ .gpio = DIR825C1_GPIO_LED_ORANGE_PLANET,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:planet",
+ .gpio = DIR825C1_GPIO_LED_BLUE_PLANET,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button dir825c1_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR825C1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR825C1_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct ar8327_pad_cfg dir825c1_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_led_cfg dir825c1_ar8327_led_cfg = {
+ .led_ctrl0 = 0xc737c737,
+ .led_ctrl1 = 0x00000000,
+ .led_ctrl2 = 0x00000000,
+ .led_ctrl3 = 0x0030c300,
+ .open_drain = false,
+};
+
+static struct ar8327_platform_data dir825c1_ar8327_data = {
+ .pad0_cfg = &dir825c1_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &dir825c1_ar8327_led_cfg,
+};
+
+static struct mdio_board_info dir825c1_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &dir825c1_ar8327_data,
+ },
+};
+
+static void dir825c1_read_ascii_mac(u8 *dest, u8 *src)
+{
+ int ret;
+
+ ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+ &dest[0], &dest[1], &dest[2],
+ &dest[3], &dest[4], &dest[5]);
+
+ if (ret != ETH_ALEN)
+ memset(dest, 0, ETH_ALEN);
+}
+
+static void __init dir825c1_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 tmpmac[ETH_ALEN];
+ u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
+
+ dir825c1_read_ascii_mac(mac1, mac + DIR825C1_MAC0_OFFSET);
+ dir825c1_read_ascii_mac(mac2, mac + DIR825C1_MAC1_OFFSET);
+
+ ath79_gpio_output_select(DIR825C1_GPIO_LED_BLUE_USB,
AR934X_GPIO_OUT_GPIO);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825c1_leds_gpio),
+ dir825c1_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, DIR825C1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir825c1_gpio_keys),
+ dir825c1_gpio_keys);
+
+ ap9x_pci_setup_wmac_led_pin(0, 13);
+ ap9x_pci_setup_wmac_led_pin(1, 32);
+
+ ath79_init_mac(tmpmac, mac1, 0);
+ ath79_register_wmac(art + DIR825C1_WMAC_CALDATA_OFFSET, tmpmac);
+
+ ath79_init_mac(tmpmac, mac2, 0);
+ ap91_pci_init(art + DIR825C1_PCIE_CALDATA_OFFSET, tmpmac);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
+
+ mdiobus_register_board_info(dir825c1_mdio0_info,
+ ARRAY_SIZE(dir825c1_mdio0_info));
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+
+ /* GMAC0 is connected to an AR8327N switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+
+// gpio_request_one(DIR825C1_GPIO_USB_POWER,
+// GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+// "USB power");
+
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_825_C1, "DIR-825-C1",
+ "D-Link DIR-825 rev. C1",
+ dir825c1_setup);
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
