The image i tried was 3.4M (sysupgrade) and then factory with 3.7M. When the router boots it shows: jffs2: Too few erase blocks (4)
Then i tried a 3.8M and it showed: jffs2: Too few erase blocks (2) The current available from downloads.openwrt.org is 3735576. i also found this: https://dev.openwrt.org/ticket/10719 I decided to make a smaller sysupgrade image with 3.4MB and the jjfs2 problem is gone. The firmware now keeps settings after boot. On 01/04/2013 10:50 PM, Daniel Dickinson wrote: > I use dir 601 a1 with no problem. Maybe the problem is the size check > and you have too big an image to create a jffs2 partition. > > Regards, > > Daniel > > On 13-01-04 10:40 PM, HeXiLeD wrote: >> I have a few dir 601 A1 and built some images from attitude adjustment >> >> >> URL: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment >> Repository Root: svn://svn.openwrt.org/openwrt >> Repository UUID: 3c298f89-4303-0410-b956-a3cf2f4a3e73 >> Revision: 35014 >> Node Kind: directory >> Schedule: normal >> Last Changed Author: nbd >> Last Changed Rev: 35003 >> Last Changed Date: 2013-01-03 15:03:14 -0500 (Thu, 03 Jan 2013) >> >> >> http://wiki.openwrt.org/toh/d-link/dir-600#supported.versions1 >> >> I now found out that all opkg packages installed or any configurations >> done are lost once the router reboots and the system reverts to the >> default build settings. >> >> Is this caused by the lack of jffs2 ? If so... it can be added to the >> wiki page as still not working. >> >> Are there any patches to solve this in trunk ? >> >> >> I also found another problem when set wireless to act as a wds server. >> >> It seems that "mode wds" does not work. The SSID does not even shows up >> on scan and some errors are outputted such as: >> >> radio0 (cfg033579): Invalid mode, ignored. >> >> Can anyone confirm these reports ? >> >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
