On 12/20/2012 06:52 AM, Nathan Hintz wrote: > I wrote this patch some time ago because I had a need for one of the > Gigabit ports (Linksys E3000) to be forced to 100FD. This is based > on the robocfg sources included w/ the RT-N16 sources from ASUS. > Since work is progressing on a BGMAC driver that could be included in > OpenWRT, this may be useful to someone else. > > In testing, forcing the speed to 10/100 or 1000 worked fine; however, > when trying to force full-duplex mode, the result was always > half-duplex. I was not able to isolate the source of the problem > (this patch, driver or H/W limitation). The only way I could get it > to work was to set the port to Auto, but then only advertise 100FD > (not included in this patch). > > I have a modified version of the robocfg package as well, I'd have to > clean it up a little first (remove the full-duplex hack) before > submitting it if there is interest. > > Signed-off-by: Nathan Hintz <nlhi...@hotmail.com> > Thank you for your patch, it was applied in r34992.
Hauke _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
