That's good to know. I must of broke it with my config. :) Can you send me your .config file so I can try to determine what is different in mine that could be causing the problem.
----- Original Message ----- From: "Hannu Nyman" <hannu.ny...@iki.fi> To: "OpenWrt Development List" <openwrt-devel@lists.openwrt.org> Sent: Tuesday, December 4, 2012 11:04:35 AM Subject: Re: [OpenWrt-Devel] Keep settings broken on NetGear WNDR3800 I can update my WNDR3800 (and 3700v2 and 3700) just fine with all settings intact. Last updates: yesterday WNDR3800 from trunk 34440 to trunk 34469, (and also 3700v2 from trunk 344xx to AA 34469). No problem with keeping settings. So, it is probably something specific for you. I am using LuCI for the update, but I believe it is just a wrapper around the sysupgrade script, so the update method should not have much effect. On 4.12.2012 17:24, John Lauro wrote: > Whenever I try to upgrade the firmware (using trunk), I loose all settings. > Everything from root password, to wifi settings such as the SID, etc... > > Can someone reproduce? (ie: maybe I did something wrong with my > configuration and broke it, any suggestions what to make sure I didn't > disable?) I assume it's not broke for all platforms. > > > Unless someone else wants to fix, I'll try to track down what's wrong and fix > as it's particularly annoying to me... but any pointers as to how it should > work and confirmation it works on other platforms would be great. (or if > someone can reproduce or deny the problem on the WNDR3800 would be great). > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
