On Nov 4, 2012, at 11:57 AM, Martin Mueller wrote: > On Thu, Oct 18, 2012 at 10:59:00PM +0200, openwrt at lukaperkov.net wrote: >> All our kirkwood uboot patches have been upstreamed with this release ;) >> >> Board owners please test this patch and give feedback for the boards: >> >> * dockstar > > Sorry it took me a while to test your patch. I applied it to trunk > r33391 and can confirm, that uboot works fine on my dockstar when > installed as primary bootloader to flash.
It doesn't work on mine--in fact, it bricks it--but this may be a documentation bug. https://dev.openwrt.org/ticket/12492 Short version: the wiki says http://wiki.openwrt.org/toh/seagate/dockstar nand write.e 0x800000 0x000000 0x40000 which really does not sound right, since u-boot is 0x594c8 bytes long. What is the procedure for flashing the new uboot as primary, and is it intended to work as a secondary? There's also both .img and .kwb files. I'm not sure what the difference is. (Since I've got original dockstars, I won't be serial booting the .kwb apparently :-) Jay _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
