AirLive AIR3GII is Ralink RT5350F based device with 100Mbps switch, USB port,
4MB flash and 32MB ram.
Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade
Does not work: wifi (chip RT5350), reset button
[ 13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350
detected.
[ 13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
Other problem: LAN leds is reverse (lights when not cable connected and vice
versa)
Signed-off-by: Cezary Jackiewicz <cezary.jackiew...@gmail.com>
---
Index: target/linux/ramips/image/Makefile
===================================================================
--- target/linux/ramips/image/Makefile (wersja 34296)
+++ target/linux/ramips/image/Makefile (kopia robocza)
@@ -436,6 +436,10 @@
$(call
Image/Build/Template/$(fs_squash)/$(1),3G6200N,3g-6200n,3G-6200N,ttyS1,57600,phys)
endef
+define Image/Build/Profile/AIR3GII
+ $(call
Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,air3gii,AIR3GII,ttyS1,57600,spi)
+endef
+
define Image/Build/Profile/ALL02393G
$(call
Image/Build/Template/$(fs_squash)/$(1),UIMAGE_8M,all0239-3g,ALL0239-3G,ttyS1,57600,phys)
endef
@@ -591,6 +595,7 @@
ifeq ($(CONFIG_RALINK_RT305X),y)
define Image/Build/Profile/Default
$(call Image/Build/Profile/3G6200N,$(1))
+ $(call Image/Build/Profile/AIR3GII,$(1))
$(call Image/Build/Profile/ALL02393G,$(1))
$(call Image/Build/Profile/ALL0256N,$(1))
$(call Image/Build/Profile/ALL5002,$(1))
Index: target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
===================================================================
--- target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig (wersja 34296)
+++ target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig (kopia robocza)
@@ -17,6 +17,11 @@
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
+config RT305X_MACH_AIR3GII
+ bool "AirLive Air3GII board support"
+ select RALINK_DEV_GPIO_BUTTONS
+ select RALINK_DEV_GPIO_LEDS
+
config RT305X_MACH_ALL0256N
bool "Allnet ALL0256N support"
select RALINK_DEV_GPIO_BUTTONS
Index: target/linux/ramips/files/arch/mips/ralink/rt305x/mach-air3gii.c
===================================================================
--- target/linux/ramips/files/arch/mips/ralink/rt305x/mach-air3gii.c (wersja
0)
+++ target/linux/ramips/files/arch/mips/ralink/rt305x/mach-air3gii.c (kopia
robocza)
@@ -0,0 +1,94 @@
+/*
+ * AirLive Air3GII board support
+ *
+ * Copyright (C) 2012 Cezary Jackiewicz <cezary.jackiew...@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+#define AIR3GII_GPIO_BUTTON_WPS 7
+
+#define AIR3GII_GPIO_LED_WLAN 8
+#define AIR3GII_GPIO_LED_MOBILE 9
+
+#define AIR3GII_KEYS_POLL_INTERVAL 20
+#define AIR3GII_KEYS_DEBOUNCE_INTERVAL (3 * AIR3GII_KEYS_POLL_INTERVAL)
+
+const struct flash_platform_data air3gii_flash = {
+ .type = "en25q32b",
+};
+
+struct spi_board_info air3gii_spi_slave_info[] __initdata = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &air3gii_flash,
+ .irq = -1,
+ .max_speed_hz = 10000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+static struct gpio_led air3gii_leds_gpio[] __initdata = {
+ {
+ .name = "airlive:green:wlan",
+ .gpio = AIR3GII_GPIO_LED_WLAN,
+ .active_low = 0,
+ }, {
+ .name = "airlive:green:mobile",
+ .gpio = AIR3GII_GPIO_LED_MOBILE,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button air3gii_gpio_buttons[] __initdata = {
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AIR3GII_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AIR3GII_GPIO_BUTTON_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init air3gii_init(void)
+{
+ rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
+
+ rt305x_register_spi(air3gii_spi_slave_info,
+ ARRAY_SIZE(air3gii_spi_slave_info));
+
+ rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
+ rt305x_register_ethernet();
+
+ ramips_register_gpio_leds(-1, ARRAY_SIZE(air3gii_leds_gpio),
+ air3gii_leds_gpio);
+
+ ramips_register_gpio_buttons(-1, AIR3GII_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(air3gii_gpio_buttons),
+ air3gii_gpio_buttons);
+
+ rt305x_register_wifi();
+ rt305x_register_wdt();
+ rt305x_register_usb();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_AIR3GII, "AIR3GII", "AirLive Air3GII",
+ air3gii_init);
Index: target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
===================================================================
--- target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile (wersja 34296)
+++ target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile (kopia robocza)
@@ -14,6 +14,7 @@
obj-$(CONFIG_RT305X_MACH_3G_6200N) += mach-3g-6200n.o
obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B) += mach-argus-atp52b.o
obj-$(CONFIG_RT305X_MACH_BC2) += mach-bc2.o
+obj-$(CONFIG_RT305X_MACH_AIR3GII) += mach-air3gii.o
obj-$(CONFIG_RT305X_MACH_ALL0256N) += mach-all0256n.o
obj-$(CONFIG_RT305X_MACH_ALL5002) += mach-all5002.o
obj-$(CONFIG_RT305X_MACH_CARAMBOLA) += mach-carambola.o
Index: target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
===================================================================
--- target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
(wersja 34296)
+++ target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
(kopia robocza)
@@ -73,5 +73,8 @@
/* RT3883 based machines */
RAMIPS_MACH_TEW_691GR, /* TRENDnet TEW-691GR */
- RAMIPS_MACH_TEW_692GR /* TRENDnet TEW-692GR */
+ RAMIPS_MACH_TEW_692GR, /* TRENDnet TEW-692GR */
+
+ /* RT5350 based machines */
+ RAMIPS_MACH_AIR3GII /* AirLive Air3GII */
};
Index: target/linux/ramips/rt305x/config-3.6
===================================================================
--- target/linux/ramips/rt305x/config-3.6 (wersja 34296)
+++ target/linux/ramips/rt305x/config-3.6 (kopia robocza)
@@ -96,6 +96,7 @@
# CONFIG_RALINK_RT3883 is not set
CONFIG_RAMIPS_WDT=y
CONFIG_RT305X_MACH_3G_6200N=y
+CONFIG_RT305X_MACH_AIR3GII=y
CONFIG_RT305X_MACH_ALL0256N=y
CONFIG_RT305X_MACH_ALL5002=y
CONFIG_RT305X_MACH_ARGUS_ATP52B=y
Index: target/linux/ramips/base-files/lib/ramips.sh
===================================================================
--- target/linux/ramips/base-files/lib/ramips.sh (wersja 34296)
+++ target/linux/ramips/base-files/lib/ramips.sh (kopia robocza)
@@ -53,6 +53,9 @@
*"Edimax 3g-6200n")
name="3g-6200n"
;;
+ *"AirLive Air3GII")
+ name="air3gii"
+ ;;
*"Allnet ALL0239-3G")
name="all0239-3g"
;;
Index: target/linux/ramips/base-files/lib/upgrade/platform.sh
===================================================================
--- target/linux/ramips/base-files/lib/upgrade/platform.sh (wersja 34296)
+++ target/linux/ramips/base-files/lib/upgrade/platform.sh (kopia robocza)
@@ -15,6 +15,7 @@
case "$board" in
3g-6200n | \
+ air3gii | \
all0239-3g | \
all0256n | \
all5002 | \
Index: target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
===================================================================
--- target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
(wersja 34296)
+++ target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
(kopia robocza)
@@ -53,6 +53,7 @@
;;
3g-6200n | \
+ air3gii | \
all0239-3g | \
all0256n | \
all5002 | \
Index: target/linux/ramips/base-files/etc/uci-defaults/leds
===================================================================
--- target/linux/ramips/base-files/etc/uci-defaults/leds (wersja 34296)
+++ target/linux/ramips/base-files/etc/uci-defaults/leds (kopia robocza)
@@ -18,6 +18,10 @@
set_wifi_led "edimax:amber:wlan"
set_usb_led "edimax:blue:3g"
;;
+ air3gii)
+ set_wifi_led "airlive:green:wlan"
+ set_usb_led "airlive:green:mobile"
+ ;;
all0256n)
ucidef_set_rssimon "wlan0" "40000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW"
"all0256n:green:rssilow" "wlan0" "1" "40" "0" "6"
Index: target/linux/ramips/base-files/etc/uci-defaults/network
===================================================================
--- target/linux/ramips/base-files/etc/uci-defaults/network (wersja 34296)
+++ target/linux/ramips/base-files/etc/uci-defaults/network (kopia robocza)
@@ -139,6 +139,7 @@
lan_mac=$(ramips_get_mac_binary factory 40)
;;
3g-6200n | \
+ air3gii | \
argus-atp52b | \
bc2 | \
f5d8235-v1 | \
--
Pozdrawiam,
Cezary Jackiewicz
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
