Hauke,

I bisected the problem to r33920 (r33919 is okay), distclean'ing
between each build.

Symptoms are that the kernel doesn't load.  I get the bootloader
messages and then "Starting program at 0x80001000" then nothing, e.g.:

  CFE version 1.0.34 for BCM95365R (32bit,SP,LE)
  Build Date: Tue Feb 24 03:21:41 CST 2004 (root@jackylinux)
  Copyright (C) 2000,2001,2002 Broadcom Corporation.

  Add MAC client version(DNI).
  Initializing Arena.
  Initializing Devices.
  et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller
  CPU type 0x29007: 200MHz
  Total memory: 0x2000000 bytes (32MB)

  Total memory used by CFE:  0x81BB1280 - 0x82000000 (4517248)
  Initialized Data:          0x81BB1280 - 0x81BB3E90 (11280)
  BSS Area:                  0x81BB3E90 - 0x81BB45D0 (1856)
  Local Heap:                0x81BB45D0 - 0x81FB45D0 (4194304)
  Stack Area:                0x81FB45D0 - 0x81FB65D0 (8192)
  Text (code) segment:       0x81FB65E0 - 0x81FFFFB0 (301520)
  Boot area (physical):      0x01B70000 - 0x01BB0000
  Relocation Factor:         I:E23B65E0 - D:01BB0280

  configure vlans
  *****************************************************************
  *********************** VLAN Driver initial  ********************
  *****************************************************************
  Process LAN port(2-5) vlan Architecture...
  SUCCESS: trying to create VLAN 0 for switch
  SUCCESS: trying to add LAN port

  Process WAN port(2-5) vlan Architecture...
  SUCCESS: trying to create VLAN 0 for switch
  SUCCESS: trying to add WAN port
  SUCCESS: enable ports  success
  configure vlans...done
  Device eth0:  hwaddr 00-0F-B5-3D-5B-58, ipaddr 192.168.1.1, mask
  255.255.255.0
          gateway not set, nameserver not set
  Loader:elf Filesys:raw Dev:flash0.os File: Options:(null)
  ***************************
  ****  MAC Client V1.0  ****
  ***************************
  et0macaddr value :flag =0 value=00-0f-b5-3d-5b-58
  et1macaddr value :flag =0 value=00-0f-b5-3d-5b-59
  MAC exist at least one
  system ethernet mac exist and not default....
  Skip mac client process.....
  Loading: 0x80000000/8188 Entry at 0x80001000
  Closing network.
  et0: link down
  Starting program at 0x80001000


-- 
Russell Senior, President
russ...@personaltelco.net
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to