Hi,
this is translation from russian:

The problem is observed on x86.
At the first test pptp was operable, with the following schematic layout used:
[ISP] -- LAN2 [tp-link wr1043nd(Backfire 10.03)] LAN1 -- eth0[x86(AA 12.09)]
TP-link wr1043nd was configured as follows:
VLAN 1:
        info: VLAN 1: Ports: '12345t', members=003e, untag=001e, fid=0
        fid: 0
        ports: 1 2 3 4 5t

Then after changing the network layout to:
[ISP] -- WAN [tp-link wr1043nd(Backfire 10.03)] LAN1 -- eth0[x86(AA 12.09)]

TP-link wr1043nd was configured as follows:
VLAN 2:
        info: VLAN 2: Ports: '01', members=0021, untag=0001, fid=0
        fid: 0
        ports: 0 1

Now pptp link fails to come up with no visible relevant messages/complaints.

Then we created /etc/ppp/peers/isp describing the connection.
Issueing "pppd call isp nodetach debug" completes without any messages. I've noticed that ppp.sh exits as soon as the server is available.

Any help is much appreciated. I'll try to provide whatever debugging information necessary.

06.11.2012 11:22, Илья Кучмин wrote:
Добрый день.

Хочу извиниться за сообщение на русском. Но для обсуждения данной
проблемы моего английского к сожалению не хватит.

Проблема наблюдается на платформе x86.
При первом испытании pptp работал, при этом схема была следующая:
[ISP] -- LAN2 [tp-link wr1043nd(Backfire 10.03)] LAN1 -- eth0[x86(AA 12.09)]
TP-link wr1043nd настроен следующим образом:
VLAN 1:
        info: VLAN 1: Ports: '12345t', members=003e, untag=001e, fid=0
        fid: 0
        ports: 1 2 3 4 5t

При изменении сетевой схемы на следующую:
[ISP] -- WAN [tp-link wr1043nd(Backfire 10.03)] LAN1 -- eth0[x86(AA 12.09)]

TP-link wr1043nd настроен следующим образом:
VLAN 2:
        info: VLAN 2: Ports: '01', members=0021, untag=0001, fid=0
        fid: 0
        ports: 0 1

Поднять pptp соединение не получается, при этом никаких отладочных
сообщений не наблюдается.

После был создан файл /etc/ppp/peers/isp с описанием подключения.
Выполнение команды pppd call isp nodetach debug завершается без каких
либо сообщений. Так же заметил, что ppp.sh завершается как только
становится доступен cервер.

Прошу помочь разобраться в проблеме. По возможности предоставлю всю
необходимую отладочную информацию.
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to