On 8 October 2012 15:33, Daniel <dgcb...@gmail.com> wrote:
> - Added the buttons for this bcm6358 board.
> - The internal phy is unused in this board, deleted.
> patch made against current AA
Better, but still not 100%.
>
> Signed-off-by: danitool
This is not a valid Signed-off-by; it has to include your real name
and your email address.
Also please send as plain text - this time patchwork didn't even
detect this as a patch. (Quoted printable seems to be properly
converted, so it seems the previous try works for now).
Jonas
> Index: target/linux/brcm63xx/patches-3.3/508-board_hw553.patch
> ===================================================================
> --- target/linux/brcm63xx/patches-3.3/508-board_hw553.patch (revisión:
> 33660)
> +++ target/linux/brcm63xx/patches-3.3/508-board_hw553.patch (copia de
> trabajo)
> @@ -1,6 +1,6 @@
> --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
> +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
> -@@ -1666,6 +1666,80 @@ static struct board_info __initdata boar
> +@@ -1666,6 +1666,92 @@
> .spis = nb4_spi_devices,
> .num_spis = ARRAY_SIZE(nb4_spi_devices),
> };
> @@ -11,15 +11,9 @@
> +
> + .has_uart0 = 1,
> +
> -+ .has_enet0 = 1,
> + .has_enet1 = 1,
> + .has_pci = 1,
> +
> -+ .enet0 = {
> -+ .has_phy = 1,
> -+ .use_internal_phy = 1,
> -+ },
> -+
> + .enet1 = {
> + .force_speed_100 = 1,
> + .force_duplex_full = 1,
> @@ -77,11 +71,29 @@
> + .active_low = 1,
> + },
> + },
> ++ .buttons = {
> ++ {
> ++ .desc = "reset",
> ++ .gpio = 37,
> ++ .type = EV_KEY,
> ++ .code = KEY_RESTART,
> ++ .active_low = 1,
> ++ .debounce_interval =
> BCM963XX_KEYS_DEBOUNCE_INTERVAL,
> ++ },
> ++ {
> ++ .desc = "wps",
> ++ .gpio = 9,
> ++ .type = EV_KEY,
> ++ .code = KEY_WPS_BUTTON,
> ++ .active_low = 1,
> ++ .debounce_interval =
> BCM963XX_KEYS_DEBOUNCE_INTERVAL,
> ++ },
> ++ },
> +};
> #endif
>
> /*
> -@@ -1708,6 +1782,7 @@ static const struct board_info __initdat
> +@@ -1708,6 +1794,7 @@
> &board_nb4_ser_r2,
> &board_nb4_fxc_r1,
> &board_nb4_fxc_r2,
>
> Index: target/linux/brcm63xx/base-files/lib/brcm63xx.sh
> ===================================================================
> --- target/linux/brcm63xx/base-files/lib/brcm63xx.sh (revisión: 33660)
> +++ target/linux/brcm63xx/base-files/lib/brcm63xx.sh (copia de trabajo)
> @@ -82,6 +82,11 @@
> brcm63xx_has_reset_button="true"
> ifname=eth0
> ;;
> + HW553)
> + status_led="HW553:red:power"
> + brcm63xx_has_reset_button="true"
> + ifname=eth0
> + ;;
> NB6)
> brcm63xx_has_reset_button="true"
> ifname=eth0
>
> Index: target/linux/brcm63xx/base-files/etc/uci-defaults/network
> ===================================================================
> --- target/linux/brcm63xx/base-files/etc/uci-defaults/network (revisión:
> 33660)
> +++ target/linux/brcm63xx/base-files/etc/uci-defaults/network (copia de
> trabajo)
> @@ -19,6 +19,7 @@
> 96348A-122 |\
> 96358-502V |\
> CT6373-1 |\
> +HW553 |\
> AW4339U |\
> CPVA642 |\
> CT536_CT5621 |\
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
