Hi Miguel, thanks, and committed.
On 31 July 2012 09:31, Miguel GAIO <miguel.g...@efixo.com> wrote: >> 2) I made the realtek patch a platform patch, because I do not know >> the impact on other devices using this switch (which didn't need it). >> 3) I added a network config for it >> 4) I commented out the nb6 image build, since even with network >> working you can't do much with it > > Hopefully, once your patches are submitted, I can help to get more > working (namely wireless) Getting wireless to work is one of the last things I expected, so I'm quite curious about how you will do it :-) >> I am more or less ready to commit this, but I am missing your >> signed-off-by. Can you please either reply with it or resend the board >> patch with it added? I created a branch on github with what I plan to >> submit, so you can use that to check that I did not miss anything ( >> https://github.com/KanjiMonster/openwrt/tree/neufbox6 ). > >> I have some additional questions though: >> >> How is one supposed to flash the NB6 without serial access? At least I >> did not find anything in the web interface that allowed me to flash an >> image, and the CFE does not provide a web interface either. >> > Without serial access, users have to use bootp method via SFR button. > > >> What's the "tftpboot"? I noticed that if I have the "SFR" button >> pressed when powering the device up, CFE prints "** tftpboot >> requested", but then shortly after that CFE crashes. > > To use SFR button you have to: > - setup DHCP server to provide board IP address > - The DHCP answer needs tftp serveur and bootp image > - Depending on nature of provided image, > the cfe can boot vmlinux or burns new tagged image > > You can found a wiki at neufbox4.org (in french) which contains HOWTOs > http://www.neufbox4.org/wiki/index.php?title=Flasher_une_NB6 That's neat, thanks for the explanation. Maybe somebody should add this to the OpenWrt wiki *cough* *lazy*. >> Lastly, you added an image build for "NB6-SER-r0", shouldn't you also >> add one for "NB6-FXC-r0"? Or do they not care about the board id? >> > Board id is not care. Great. I decided to enable building the images, since it allows people to play with it, but unless we manage to get bcm63xx migrated to swconfig before the AA, I don't know if it makes sense to have it built for the release. Jonas _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
