Failsafe netlogon seems to be broken. telnetd starts but network is not
unconfigured. Console login works.
I define ramips_failsafe function with known hardcoded network configs and add
it into failesafe_hook list. Checked for rt305x (dir300b1 & dir620a1).
P.S. I think that other target has the same problem?
Signed-off-by: Serge Vasilugin <vasilugin at yandex.ru>
Index: target/linux/ramips/base-files/lib/ramips.sh
===================================================================
--- target/linux/ramips/base-files/lib/ramips.sh (revision 32760)
+++ target/linux/ramips/base-files/lib/ramips.sh (working copy)
@@ -174,3 +174,49 @@
echo $name
}
+
+ramips_failsafe()
+{
+ local board
+
+ board=$(ramips_board_name)
+ # ramips rt305x switch driver hardcoded lan=eth0.1 & wan=eth0.2 so
ignore fs_failsafe_ifname
+ # but just for case some additional
+ case "$board" in
+ wli-tx4-ag300n)
+ ifconfig eth0 ${fs_failsafe_ip:-192.168.1.1} netmask
${fs_failsafe_mask:-255.255.255.0} up
+ ;;
+
+ v11st-fe | \
+ rt-n56u | \
+ rt-n15 | \
+ wl-351)
+ # devices with supported switch may work if hardcoded too. need
check!
+ vconfig add eth0 1
+ ifconfig eth0.1 ${fs_failsafe_ip:-192.168.1.1} netmask
${fs_failsafe_mask:-255.255.255.0}
+ ifconfig eth0 up
+ ifconfig eth0.1 up
+ ;;
+
+ freestation5 | \
+ wcr-150gn)
+ # devices with lan=eth0.2
+ vconfig add eth0 2
+ ifconfig eth0.2 ${fs_failsafe_ip:-192.168.1.1} netmask
${fs_failsafe_mask:-255.255.255.0}
+ ifconfig eth0 up
+ ifconfig eth0.2 up
+ ;;
+
+ *)
+ RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
+ if [ -n "${RT3X5X}" ]; then
+ vconfig add eth0 1
+ ifconfig eth0.1 ${fs_failsafe_ip:-192.168.1.1} netmask
${fs_failsafe_mask:-255.255.255.0}
+ ifconfig eth0 up
+ ifconfig eth0.1 up
+ else
+ ifconfig eth0 ${fs_failsafe_ip:-192.168.1.1} netmask
${fs_failsafe_mask:-255.255.255.0} up
+ fi
+ ;;
+ esac
+}
Index: target/linux/ramips/base-files/lib/preinit/03_preinit_do_ramips.sh
===================================================================
--- target/linux/ramips/base-files/lib/preinit/03_preinit_do_ramips.sh
(revision 32760)
+++ target/linux/ramips/base-files/lib/preinit/03_preinit_do_ramips.sh
(working copy)
@@ -5,3 +5,4 @@
}
boot_hook_add preinit_main do_ramips
+boot_hook_add failsafe ramips_failsafe
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
