On 06/06/12 22:58, Daniel Golle wrote:
Hi Tim,
great news, I'd would be nice if you can help so we can get U-Boot for this
board tested.
On 06/06/12 15:24, Tim Fletcher wrote:
I have access to an iConnect, what is it that you need testing?
OpenWrt can build the U-Boot loader for some boards, including the kirkwood
platform. So board-specific definitions for the iconnect were added to the
uboot-kirkwood package, but they didn't get upstream till now.
In order to update U-Boot to version 2012.04.01, I forward-ported the board
support for the iconnect by applying the same changes to it which were also
committed to similar devices like the SheevaPlug in the U-Boot sources.
So this should be tested before it can go upstream.
Basically, the other OpenWrt-supported board, the dockstar, already made it's
way into the U-Boot sources, so patch 2181 is obsoleted by that.
After applying the 3 patches (see below) to trunk, you will have the option to
build uboot for the iconnect board.
Please test the resulting image by chain-loading it with your current U-Boot
(risk free).
For this you will need the device hooked up via serial console, and enter the
bootloader after power-on, the procedure looks like this:
I've got it all patched in and hooked up I've left it building over
night and I'll try and test this tomorrow
--
Tim Fletcher<t...@night-shade.org.uk>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
