First thanks jogo for adding support for bcm 96328avng board.But my 96328avng
board is still unrecognized with trunk updated after r32004.
TTL:
Build Date: 2010-06-28 15:35:56 (wander@broadcom-eu)CFE version 1.0.37-106.17-1
for BCM96328 (32bit,SP,BE)
Copyright (C) 2000-2009 Broadcom Corporation.
HS Serial flash device: name S25FL128, id 0x0118 size 16384KB
Total Flash size: 16384K with 256 sectors
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 67108864 bytes (64MB)
Boot Address: 0xb8000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-7) : 96328avng
Number of MAC Addresses (1-32) : 11
Base MAC Address : 00:1f:8f:0a:8a:b6
PSI Size (1-64) KBytes : 48
Enable Backup PSI [0|1] : 1
System Log Size (0-256) KBytes : 64
Main Thread Number [0|1] : 0
Serial Number :
Voice Board Configuration (0-11) :
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Booting from only image (0xb8010000) ...
Code Address: 0x80010000, Entry Address: 0x80010000
LZMA: Prossible old LZMA format, trying to decompress..
Decompression OK!
Entry at 0x80010000
Closing network.
Disabling Switch ports.
Flushing Receive Buffers...
151 buffers found.
Closing DMA Channels.
Starting program at 0x80010000
[ 0.000000] Linux version 3.3.7 (vince@desktop) (gcc version 4.6.3 20120201
(prerelease) (Linaro GCC 4.6-2012.02) ) #3 Thu May 31 12:19:54 CST 2012
[ 0.000000] Detected Broadcom 0x6328 CPU revision 10b0
[ 0.000000] CPU frequency is 320 MHz
[ 0.000000] 64MB of RAM installed
[ 0.000000] registering 32 GPIOs
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: bcm63xx-gpio
[ 0.000000] board_bcm963xx: Boot address 0xb8000000
[ 0.000000] board_bcm963xx: CFE version: 1.0.37-106.17
[ 0.000000] board_bcm963xx: unknown bcm963xx board: 96328avng
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0002a075 (Broadcom BMIPS4350)
[ 0.000000] Kernel panic - not syncing: unable to detect bcm963xx board
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
