OK.
The board is based on BCM6328 and BCM4313 for wireless.
------------------ ???????? ------------------
??????: "Florian Fainelli"<flor...@openwrt.org>;
????????: 2012??5??29??(??????) ????5:31
??????: "Vince Huang"<axish...@foxmail.com>;
"openwrt-devel"<openwrt-devel@lists.openwrt.org>;
????: Re: [OpenWrt-Devel] In need of DSL274XB rev F1(BCM6328) 's cfe.
On Tuesday 29 May 2012 17:19:45 Vince Huang wrote:
> Yes??I can go back to previous firmware. But I want to try openwrt on it.With
AW4339U 's cfe,I think besides wireless other functions should work.So I need
this cfe to try.
Keep the openwrt-devel list in copy (use reply-all).
Do not top post please.
You need to add the definition of your board for Linux to recognize it, not
change CFE so that it matches the sole board that is supported for the moment.
--
Florian
>
>
>
>
> ------------------ Original ------------------
> From: "Florian Fainelli"<flor...@openwrt.org>;
> Date: Tue, May 29, 2012 03:42 PM
> To: "openwrt-devel"<openwrt-devel@lists.openwrt.org>;
> Cc: "Vince Huang"<axish...@foxmail.com>;
> Subject: Re: [OpenWrt-Devel] In need of DSL274XB rev F1(BCM6328) 's cfe.
>
>
>
> Hi,
>
> On Tuesday 29 May 2012 12:33:32 Vince Huang wrote:
> > Hi,fellas!
> > As bcm6238 is supported by openwrt bcm63xx.I flashed a device based on
> 96328avng with DSL274XB-F1 firmware and got a kerel panic.
> > So I need a a cfe for DSL274XB rev F1(board: AW4339U ?) to mod it work
with
> openwrt.
>
> You are getting a kernel panic because the reference board you are using is
> not supported by OpenWrt yet. But this does not prevent you from flashing a
new
> image from the CFE prompt, does it? Flashing the wrong image should not
result
> in overwriting CFE anymore.
> --
> Florian
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
