Hello Everyone, Is there any information on queries on AR7240 ethernet switch available?
Kindly respond if anyone has any information. Thanks, On Tue, May 15, 2012 at 8:11 AM, Parul Aggarwal < parul.aggar...@sibridgetech.com> wrote: > Hello Everyone, > > Is there any information on queries on AR7240 ethernet switch available? > > Kindly respond if anyone has any information. > > Thanks, > > > On Fri, May 11, 2012 at 11:03 AM, Parul Aggarwal < > parul.aggar...@sibridgetech.com> wrote: > >> Hello Everyone, >> >> Can anyone provide information on queries asked in my last post on AR7240 >> ethernet switch? >> >> Query posted again below: >> >> >> "AR7240 has integrtaed 803.2 ethernet switch with five 10/100 Mbps Fast >> ethernet MAC/PHY. We want to do loopback test on the ethernet peripheral of >> AP91. >> >> I had few questions here: >> 1. AR7240 ethernet reigisters shows two bits for loopback >> a. In MAC configuration 1 register, bit 8: Enabling this as we >> understand enables MAC loopback. >> b. Port Control register, bit 12: Description of register says >> "Setting this bit to 1 enables the MAC loopback function on MII interface" >> As we understand this is "MII loopback" and enabling just this bit (with >> MAC configuration register bit 8 reset) we should have MII loopback. Is the >> understanding correct here for MII loopback, does ar7240 switch support MII >> loopback? >> 2. Does the switch support PHY loopback and how do we enable that? >> 3. Which ethernet switch from atheros is used in AR7240? >> >> I basically need information on what all ethernet loopback modes AR7240 >> support and how to enable that." >> >> Any response would be appreciated. >> >> Thanks, >> Parul >> >> >> On Wed, May 9, 2012 at 1:35 PM, Parul Aggarwal < >> parul.aggar...@sibridgetech.com> wrote: >> >>> Hi Everyone, >>> >>> AR7240 has integrtaed 803.2 ethernet switch with five 10/100 Mbps Fast >>> ethernet MAC/PHY. We want to do loopback test on the ethernet peripheral of >>> AP91. >>> >>> I had few questions here: >>> 1. AR7240 ethernet reigisters shows two bits for loopback >>> a. In MAC configuration 1 register, bit 8: Enabling this as we >>> understand enables MAC loopback. >>> b. Port Control register, bit 12: Description of register says >>> "Setting this bit to 1 enables the MAC loopback function on MII interface" >>> As we understand this is "MII loopback" and enabling just this bit (with >>> MAC configuration register bit 8 reset) we should have MII loopback. Is the >>> understanding correct here for MII loopback, does ar7240 switch support MII >>> loopback? >>> 2. Does the switch support PHY loopback and how do we enable that? >>> 3. Which ethernet switch from atheros is used in AR7240? >>> >>> I basically need information on what all ethernet loopback modes AR7240 >>> support and how to enable that. >>> >>> Any help would be appreciated. >>> >>> Regards, >>> Parul >>> >> >> >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
