Hi, a formal question, rather cosmetic: played around with the WR842 today. (Which is a really nice box with USB, 8/32MB for very few money..)
It's using the TL-MR3x20 board which seems 99% fine but it has different buttons: - labeled "WPS / Reset" which is mapped to "wps" right now - labeled "Wifi on/off" which is mapped to "reset" And a LED with a lock-symbol (would call it WPS) instead of 3G. Would be the right way to create a target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr842.c for this box and if yes - debounce the WPS/Reset-button for lets say 5secs ? Very close related question on the WR2543: The 2.4/5GHz leds dont seem to be used right now. Is it due to them being inaccessible or is it just about finding out the right GPIO? And one final question (not very related): I've seen in mach-tl-*.c that the USB-power seems to be toggled by a GPIO but no way to access that from userspace. Does it make sense to get onto this GPIO to toggle power on USB? (I have some sluggish USB-devices which could greatly benefit from this, pulling the plug is medicine, no solution but works..) Michael PS: once again thumbs up for your great work! both worked instantly fine from current trunk. _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
