Why is needed in so early stages? Why not in a kernel module? This seems the solution on atheros driver in netgear's firmware, or not?
On 08/05/2012 12:07, John Crispin wrote:
On 07/05/12 21:39, Pieter Voorthuijsen wrote:Hi all, I've been working on the dgn3500 implementation and I have a patch that fully supports this platform. I need advice on an init script to load the eeprom from user-space: +#!/bin/sh /etc/rc.common +# Copyright (C) 2012 Pieter Voorthuijsen + +START=04 +start() { + echo "Loading eeprom into platform data" + dd if=/dev/mtd2 of=/sys/firmware/ath_eeprom bs=1k skip=60 count=4 + echo 0> /sys/bus/pci/slots/0000\:00\:0e.0/power + sleep 1 + echo 1> /sys/bus/pci/rescan +} + I want to place this in rc.d (S04athfixup), is that the right spot? Right now the code runs for all lantiq boards, can I detect the board in this stage? Kind regards, PieterHi, we will move the lantiq target to OF support soon and will need to find a more generic solution for this problem anyhow. i am currently considering to load pci after nand/spi to be able to get the pci fixup code to load the eeprom directly. anyhow, i have no problem merging the porposed patch as long as it works. John _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
