Anyway, Thanks for the support :)
On Mon, May 7, 2012 at 1:40 AM, Jonathan Bennett <jbscienc...@gmail.com> wrote: > > On May 6, 2012 11:55 AM, "Alberich de megres" <alberich...@gmail.com> wrote: >> >> And for the Jtag? > > Never had to use jtag, so no idea, honestly. Sorry. > > >> >> >> On Sun, May 6, 2012 at 7:41 AM, Jonathan Bennett <jbscienc...@gmail.com> >> wrote: >> > https://www.adafruit.com/products/70 is a great serial cable. It's >> > used for ttl level serial. (If you have to solder to the board, it's >> > probably ttl. If there is an actual serial port, then it's 12 v >> > serial. Different device) >> > >> > On Sat, May 5, 2012 at 9:16 AM, Alberich de megres >> > <alberich...@gmail.com> wrote: >> >> One more last question: >> >> >> >> which serial/jtag cable do you use? (if it is cheap, better) >> >> >> >> thanks! >> >> >> >> >> >> On Wed, May 2, 2012 at 5:55 PM, Jonathan Bennett >> >> <jbscienc...@gmail.com> wrote: >> >>> On Sat, Apr 28, 2012 at 9:22 AM, Alberich de megres >> >>> <alberich...@gmail.com> wrote: >> >>>> Hi, >> >>>> >> >>>> @Jonathan, >> >>>> how get access to the bootloader? >> >>>> do you send it to the router by streaming, or write it and then boot >> >>>> it? >> >>> >> >>> Get a serial port and watch the output as you turn it on. Normally >> >>> there will be a message about how to interrupt the boot loader. Then >> >>> you send your image to ram, either over tftp or the serial connection. >> >>> then you just boot from where you loaded it in ram. >> >>> _______________________________________________ >> >>> openwrt-devel mailing list >> >>> openwrt-devel@lists.openwrt.org >> >>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel >> >> _______________________________________________ >> >> openwrt-devel mailing list >> >> openwrt-devel@lists.openwrt.org >> >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel >> > _______________________________________________ >> > openwrt-devel mailing list >> > openwrt-devel@lists.openwrt.org >> > https://lists.openwrt.org/mailman/listinfo/openwrt-devel >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
