Hello,
I've just spent the last few hours reading many threads in the archives
from this list. I'm hoping someone may be able to help me, else I think
I have a batch of bad radios.
Summary: hardware is two identical routerstation pros running OpenWRT
bleeding edge from 2012-03-14 (with a compat-wireless from february I
believe). SR71-A (ath9k) radio in each.
I'm bringing up the interfaces in each like this:
iw phy0 interface add wlan0 type mp
iw phy0 set channel 36 HT40+
iw wlan0 set meshid TheMeshID
ifconfig wlan0 up
brctl addif br-lan wlan0
Running iperf in either direction produces a range of 13-16 Mbits/sec
when I can point to countless examples in the mailing list archives that
show people getting significantly higher bandwidth.
While pushing my test through, an `iw dev wlan0 station dump` on either
node often shows the bitrates at:
300.0 MBit/s MCS 15 40Mhz short GI
I'm getting similar, if not poorer results on higher 5ghz channels
(149+, 157+). Am I horribly misconfiguring something or is it my
hardware? My antennas are 3x3 panels spaced about 10 meters apart.
Thanks for any insight,
--
Ray Gibson
Future Concepts IS Inc.
909-593-6705 x2096
This communication constitutes an electronic communication within the meaning
of the Electronic Communications Privacy Act, 18 USC 2510, and its disclosure
is strictly limited to the recipient intended by the sender of this message.
This e-mail and any files transmitted with it are proprietary and intended for
the sole use of the individual or entity to whom they are addressed. They are
not to be viewed, shared, copied or forwarded, regardless to whom, without the
expressed permission of Future Concepts I.S., Inc. If you have received this
e-mail in error, please notify the sender and immediately delete it from your
system. Thank you.
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
