Hi Jeroen, check out this link. Should cover everything but sing out if still unclear.
https://dev.openwrt.org/wiki/SubmittingPatches Sent from my iPhone On 11 Apr 2012, at 17:30, Jeroen van Bemmel <jbem...@zonnet.nl> wrote: > Hello, > > Here´s some fixes for a D-Link DVA-G3810BN target. The first is an edit and > the second should be a patch, but I´m not sure how to make the patch - it´s a > heavily patched file > > Edit: > trunk/target/linux/brcm63xx/image/Makefile > # D-Link DVA-G3810BN/TL > $(call Image/Build/CFEFIXUP,$(1),96358VW,DVAG3810BN,6358,DVAG3810BN) > > Add: > linux-brcm63xx/linux-3.0.18/arch/mips/bcm63xx/boards/board_bcm63xx.c > > /* D-Link DVA-G3810BN/TL */ > static struct board_info __initdata board_DVAG3810BN = { > .name = "DVAG3810BN", > .expected_cpu_id = 0x6358, > > .has_uart0 = 1, > .has_enet0 = 1, > .has_enet1 = 1, > .has_pci = 1, > > .enet0 = { > .has_phy = 0, // makes warnings go away > .use_internal_phy = 1, > .force_speed_100 = 1, > .force_duplex_full = 1, > }, > > .enet1 = { > .force_speed_100 = 1, > .force_duplex_full = 1, > }, > > > .has_ohci0 = 1, > .has_pccard = 1, > .has_ehci0 = 1, > > .leds = { > { > .name = "VoIP", > .gpio = 1, > }, > { > .name = "DSL", > .gpio = 22, > .active_low = 1, > }, > { > .name = "Internet", > .gpio = 23, > .active_low = 1, > }, > { > .name = "power", > .gpio = 4, > .default_trigger = "default-on", > }, > { > .name = "stop", > .gpio = 5, > }, > }, > > .buttons = { > { > .desc = "reset", > .gpio = 10, // Not sure, 1..9, 30,31,32,33,34=wrong > .active_low = 1, > .type = EV_KEY, > .code = KEY_RESTART, > .threshold = 3, > }, > }, > }; > > [....] > > &board_DVAG3810BN, > > Could someone put this in trunk, or explain what to do to get it added? > > Thanks, > Jeroen > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
