Apologies fr my frustrated rant ;-) Thanks everyone for your advice. One last try in-line. Is that any better?
Please advise On 6 April 2012 10:01, Hanno Schupp <hanno.sch...@gmail.com> wrote: > Great collaboration on these two fantastic routers on the openwrt forum: > https://forum.openwrt.org/viewtopic.php?id=32320 > Above all kudos to aryufan. Well done and thank you everyone else who > contributed. > > To-Do: LED for wlan is not yet activated > To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by > the router > > Signed-off-by: Hanno Schupp hanno.sch...@gmail.com > > > Index: target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c > =================================================================== > --- target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c (revision > 31152) > +++ target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c (working copy) > @@ -9,17 +9,24 @@ > */ > > #include <linux/export.h> > +#include <linux/pci.h> > +#include <linux/ath9k_platform.h> > #include <linux/platform_device.h> > #include <linux/phy.h> > #include <linux/ar8216_platform.h> > > #include <asm/mach-ath79/ar71xx_regs.h> > #include <asm/mach-ath79/ath79.h> > +#include <asm/mach-ath79/pci.h> > +#include <asm/mach-ath79/irq.h> > #include <asm/mach-ath79/mach-rb750.h> > > #include "common.h" > +#include "dev-usb.h" > #include "dev-eth.h" > #include "machtypes.h" > +#include "pci-ath9k-fixup.h" > +#include "pci.h" > > static struct rb750_led_data rb750_leds[] = { > { > @@ -270,3 +277,88 @@ > > MIPS_MACHINE(ATH79_MACH_RB_750G_R3, "750Gr3", "MikroTik RouterBOARD 750GL", > rb750gr3_setup); > + > +static struct ath9k_platform_data rb751_wmac_data = { > + .led_pin = -1, > +}; > + > +static u8 rb751_wmac_mac[6]; > + > +static int rb751_pci_plat_dev_init(struct pci_dev *dev) > +{ > + switch (PCI_SLOT(dev->devfn)) { > + case 0: > + dev->dev.platform_data = &rb751_wmac_data; > + break; > + } > + > + return 0; > +} > + > +static int decode_rle(char* output, int len, char* in) > +{ > + char* ptr = output; > + char* end = output + len; > + while(*in) { > + if(*in < 0) { > + int i = -*in++; > + while(i-- > 0) { > + if(ptr >= end) > + return -1; > + *ptr++ = *in++; > + } > + } else if(*in > 0) { > + int i = *in++; > + while(i-- > 0) { > + if(ptr >= end) > + return -1; > + *ptr++ = *in; > + } > + in++; > + } > + } > + return ptr - output; > +} > + > +#define RB751_HARDCONFIG 0x1f00b000 > +#define RB751_MAC_ADDRESS_OFFSET 0xE80 > +#define RB751_CALDATA_OFFSET 0x27C > + > +static void __init rb751_wlan_and_usb_setup(void) > +{ > + u8 *hardconfig = (u8 *) KSEG1ADDR(RB751_HARDCONFIG); > + > + ath79_register_usb(); > + > + ath79_pci_set_plat_dev_init(rb751_pci_plat_dev_init); > + ath79_register_pci(); > + > + rb751_wmac_data.macaddr = memcpy(rb751_wmac_mac, > + hardconfig + RB751_MAC_ADDRESS_OFFSET, 6); > + > + if(decode_rle((char*)rb751_wmac_data.eeprom_data, > + sizeof(rb751_wmac_data.eeprom_data), > + hardconfig + RB751_CALDATA_OFFSET) == > + sizeof(rb751_wmac_data.eeprom_data)) { > + pr_info("rb7xx: calibration data found\n"); > + pci_enable_ath9k_fixup(0, rb751_wmac_data.eeprom_data); > + } > +} > + > +static void __init rb751_setup(void) > +{ > + rb750_setup(); > + rb751_wlan_and_usb_setup(); > +} > + > +MIPS_MACHINE(ATH79_MACH_RB_751, "751", "MikroTik RouterBOARD 751", > + rb751_setup); > + > +static void __init rb751g_setup(void) > +{ > + rb750gr3_setup(); > + rb751_wlan_and_usb_setup(); > +} > + > +MIPS_MACHINE(ATH79_MACH_RB_751G, "751g", "MikroTik RouterBOARD 751G", > + rb751g_setup); > Index: target/linux/ar71xx/base-files/lib/ar71xx.sh > =================================================================== > --- target/linux/ar71xx/base-files/lib/ar71xx.sh (revision 31152) > +++ target/linux/ar71xx/base-files/lib/ar71xx.sh (working copy) > @@ -250,6 +250,12 @@ > *"RouterBOARD 750GL") > name="rb-750gl" > ;; > + *"RouterBOARD 751") > + name="rb-751" > + ;; > + *"RouterBOARD 751G") > + name="rb-751g" > + ;; > *"Rocket M") > name="rocket-m" > ;; > Index: target/linux/ar71xx/base-files/etc/uci-defaults/network > =================================================================== > --- target/linux/ar71xx/base-files/etc/uci-defaults/network (revision > 31152) > +++ target/linux/ar71xx/base-files/etc/uci-defaults/network (working copy) > @@ -63,6 +63,7 @@ > ;; > > rb-750gl |\ > +rb-751g |\ > wzr-hp-g450h) > ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" > ucidef_add_switch "switch0" "1" "1" > @@ -153,6 +154,7 @@ > dir-615-e4 |\ > ja76pf |\ > rb-750 |\ > +rb-751 |\ > tew-632brp |\ > tl-mr3220 |\ > tl-mr3420 |\ _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
