2012.01.25. 1:34 keltezéssel, Marco Antonio Mauro írta: > This patch adds support for the Sitecom WL-341 v3 and other Sercomm > IP1006RRv2 based boards for sysupgrade support and for the initial > flash through pushbutton initiated recovery mode with the special > partition table and fixes for the quirks and things required by the > modified bootloader. > > There is a known bug, Wi-Fi is not working on my board probably > because of the lack of RAM (the board only has 16MiB ram -- half of > the normal amount for non rebadged versions, but there is an empty > slot for another ram chip,) but I don't know for sure. The driver > loads but hostapd fails to load so I think it's not related to the > specific device except for the lack of RAM. > > Moreover, only 7 of the 11 onboard leds are confirmed working, it > seems that one of the others is always on and the remaining ones are > connected to the wireless card leds already recognized by OpenWrt > > The patch is attached and not inline to avoid mangling by my mail client. > > This obsoletes and replaces my previous patch, which has a copypaste error. > > Signed-off-by: Marco Antonio Mauro <marcu...@gmail.com>
Applied with minor changes. Thanks, Gabor _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
