Add mach-all0256n.c doing the board-setup. Signed-off-by: Daniel Golle <dgo...@allnet.de>
Index: target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all0256n.c
===================================================================
--- target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all0256n.c
(revision 0)
+++ target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all0256n.c
(revision 0)
@@ -0,0 +1,128 @@
+/*
+ * Allnet ALL0256N board support
+ *
+ * Copyright (C) 2012 Daniel Golle <dgo...@allnet.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+#define ALL0256N_GPIO_BUTTON_RESET 0
+#define ALL0256N_GPIO_LED_RSSI_LOW 14
+#define ALL0256N_GPIO_LED_RSSI_MED 12
+#define ALL0256N_GPIO_LED_RSSI_HIGH 13
+#define ALL0256N_BUTTONS_POLL_INTERVAL 20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition all0256n_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x030000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x030000,
+ .size = 0x010000,
+ }, {
+ .name = "factory",
+ .offset = 0x040000,
+ .size = 0x010000,
+ }, {
+ .name = "kernel",
+ .offset = 0x050000,
+ .size = 0x0D0000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x120000,
+ .size = 0x2E0000,
+ }, {
+ .name = "firmware",
+ .offset = 0x050000,
+ .size = 0x3B0000,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+
+const struct flash_platform_data all0256n_flash = {
+ .type = "mx25l3205d",
+#ifdef CONFIG_MTD_PARTITIONS
+ .parts = all0256n_partitions,
+ .nr_parts = ARRAY_SIZE(all0256n_partitions),
+#endif
+};
+
+struct spi_board_info all0256n_spi_slave_info[] __initdata = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &all0256n_flash,
+ .irq = -1,
+ .max_speed_hz = 10000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+static struct gpio_button all0256n_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .threshold = 3,
+ .gpio = ALL0256N_GPIO_BUTTON_RESET,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led all0256n_leds_gpio[] __initdata = {
+ {
+ .name = "all0256n:green:rssilow",
+ .gpio = ALL0256N_GPIO_LED_RSSI_LOW,
+ .active_low = 1,
+ }, {
+ .name = "all0256n:green:rssimed",
+ .gpio = ALL0256N_GPIO_LED_RSSI_MED,
+ .active_low = 1,
+ }, {
+ .name = "all0256n:green:rssihigh",
+ .gpio = ALL0256N_GPIO_LED_RSSI_HIGH,
+ .active_low = 1,
+ }
+};
+
+static void __init all0256n_init(void)
+{
+ rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
+ rt305x_register_spi(all0256n_spi_slave_info,
+ ARRAY_SIZE(all0256n_spi_slave_info));
+ rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
+ rt305x_register_ethernet();
+ ramips_register_gpio_leds(-1, ARRAY_SIZE(all0256n_leds_gpio),
+ all0256n_leds_gpio);
+ ramips_register_gpio_buttons(-1, ALL0256N_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(all0256n_gpio_buttons),
+ all0256n_gpio_buttons);
+ rt305x_register_wifi();
+ rt305x_register_wdt();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_ALL0256N, "ALL0256N", "Allnet ALL0256N",
+ all0256n_init);
signature.asc
Description: Digital signature
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
