On 19 January 2012 11:11, Alexander Gordeev <lasa...@lvk.cs.msu.su> wrote: > В Thu, 19 Jan 2012 09:55:23 +0100 > Helmut Schaa <helmut.sc...@googlemail.com> пишет: > >> On Thu, Jan 19, 2012 at 2:33 AM, Marco Antonio Mauro <marcu...@gmail.com> >> wrote: >> > 2. The device boots successfully but I cannot enable the wifi access >> > point. In the system log there is an error. You can see the log here: >> > http://wiki.openwrt.org/toh/sitecom/wl-341#notes >> > I personally think it's a not enough RAM problem, but the device tells >> > me there is over 5MB of ram available at boot time so I'm a bit >> > puzzled. >> >> Indeed the driver is not able to allocate the queue entries it requires :( >> >> I only used rt2x00 on a 32MByte RT3052 SoC yet, so not sure how to >> debug that further on your 16MByte machine ... > > I have a rt3050 board with 16MBs of RAM and had to add this to rc.local: > > for i in $(seq 1 10); do > [ -h /sys/class/net/br-lan/brif/wlan0 ] && break > sleep 3 > wifi up > done > > It usually starts after 2-3 iterations. Hope it will be more > memory-efficient some time... >
Hmm... I have rt3050 board with 16MB ram too, but don't remember having any problems with it. I should check probably. Regards, Roman _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
