Hi Tathagata, I found an error in my initialization code for usb cores with rev >= 5 like yours. Could you please try a version with my fix in r29605.
Hauke On 12/23/2011 08:37 AM, Tathagata Das wrote: > I tested USB with latest trunk (revision number 29600) and it did not > work. When I attached my USB drive to the board I received below error > messages. > > [ 410.408000] usb 1-1: new high speed USB device number 2 using > ehci-platform > [ 410.584000] usb 1-1: unable to read config index 0 descriptor/start: -71 > [ 410.588000] usb 1-1: chopping to 0 config(s) > [ 410.604000] usb 1-1: string descriptor 0 read error: -71 > [ 410.608000] usb 1-1: no configuration chosen from 0 choices > > However with my USB patch I can mount the same USB drive. > > Regards, > Tathagata > > On 12/23/2011 02:26 AM, Hauke Mehrtens wrote: >> On 12/14/2011 06:19 AM, Tathagata Das wrote: >>> Hi, >>> Attached is the kernel patch to support brcm47xx BCMA USB (both OHCI and >>> EHCI). >>> I have used latest trunk source code to create this patch. >>> >>> Regards, >>> Tathagata<tathag...@alumnux.com> >> Hi Tathagata, >> >> I added my USB Host driver for bcma in commit r29575. The hole >> architecture with the ohci driver starting the ehci driver was crap and >> would never be accepted in mainline kernel. I will try to push this into >> mainline kernel. >> >> Your patch for USB support is rejected then. >> >> Please try recent trunk and report a problem if USB does not work as >> expected. >> >> Hauke >> _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
