On 2011-12-18 3:16 PM, Mark Deneen wrote: >>>> 3. While the LEDs function, they are registered after the ath9k.ko >>>> module is loaded. Because of this, the blinking preinit LED doesn't >>>> show up, since the module is loaded after preinit starts. >>> Shouldn't the red diag LED be the blinking preinit LED? >>> According to your patch it's set up as a normal GPIO led. >> Ah, I see. The code is using the green router LED. I think I'll change >> it to use the diag LED instead. >> By the way, your patch seems to set the wmac gpio to a bogus value. The >> wireless LED at GPIO 5 should be configured as the wmac LED and not >> registered as an extra LED. I'll take care of it. > > I saw that the red diagnostic light was an option, since it was > available at boot. However, I was hoping to keep things as similar to > the current G300NH, but maybe we should change the G300NH to match the > NH2, since the diagnostic LED is likely to always be hooked up to to a > normal GPIO. > > As for the wmac gpio, I understand what it is doing now. Sorry for > the mistake there, I thought that it was doing something else. Applied the patch with my modifications in r29567
- Felix _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
