Fix partition sizes.
Add buttons and leds.
Register usb.
Remove unnecessary stuff from Makefile (hope it will not be mangled by gmail).
Fix eeprom extract.
Signed-off-by: Roman Yeryomin <ro...@advem.lv>
Index: target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c
===================================================================
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c
(revision 28717)
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c
(working copy)
@@ -22,6 +22,44 @@
#include "devices.h"
+#define WCR150GN_GPIO_LED_USER 12
+#define WCR150GN_GPIO_LED_POWER 8
+#define WCR150GN_GPIO_BUTTON_WPS 10
+#define WCR150GN_GPIO_BUTTON_RESET 0
+#define WCR150GN_BUTTONS_POLL_INTERVAL 20
+
+static struct gpio_led wcr150gn_leds_gpio[] __initdata = {
+ {
+ .name = "wcr150gn:amber:user",
+ .gpio = WCR150GN_GPIO_LED_USER,
+ .active_low = 1,
+ },
+ {
+ .name = "wcr150gn:amber:power",
+ .gpio = WCR150GN_GPIO_LED_POWER,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_button wcr150gn_gpio_buttons[] __initdata = {
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .threshold = 3,
+ .gpio = WCR150GN_GPIO_BUTTON_WPS,
+ .active_low = 1,
+ },
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .threshold = 10,
+ .gpio = WCR150GN_GPIO_BUTTON_RESET,
+ .active_low = 1,
+ }
+};
+
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition wcr150gn_partitions[] = {
{
@@ -33,18 +71,24 @@
.name = "config",
.offset = 0x030000,
.size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
}, {
.name = "factory",
.offset = 0x040000,
.size = 0x050000,
+ .mask_flags = MTD_WRITEABLE,
}, {
.name = "kernel",
.offset = 0x050000,
- .size = 0x120000,
+ .size = 0x0d0000,
}, {
.name = "rootfs",
.offset = 0x120000,
- .size = 0x400000,
+ .size = 0x2e0000,
+ }, {
+ .name = "firmware",
+ .offset = 0x050000,
+ .size = 0x3b0000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
@@ -60,10 +104,16 @@
{
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
rt305x_register_flash(0, &wcr150gn_flash_data);
+ ramips_register_gpio_leds(-1, ARRAY_SIZE(wcr150gn_leds_gpio),
+ wcr150gn_leds_gpio);
+ ramips_register_gpio_buttons(-1, WCR150GN_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(wcr150gn_gpio_buttons),
+ wcr150gn_gpio_buttons);
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
rt305x_register_ethernet();
rt305x_register_wifi();
rt305x_register_wdt();
+ rt305x_register_usb();
}
MIPS_MACHINE(RAMIPS_MACH_WCR150GN, "WCR150GN", "Sparklan WCR-150GN",
Index: target/linux/ramips/image/Makefile
===================================================================
--- a/target/linux/ramips/image/Makefile (revision 28717)
+++ b/target/linux/ramips/image/Makefile (working copy)
@@ -202,15 +202,8 @@
$(call Image/Build/Template/GENERIC_8M,$(1),mofi3500-3gn,MOFI3500-3GN)
endef
-mtdlayout_wcr150gn=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
-mtd_wcr150gn_kernel_part_size=851968
-mtd_wcr150gn_rootfs_part_size=3014656
-define Image/Build/Template/WCR150GN
- $(call
BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_wcr150gn,$(mtd_wcr150gn_kernel_part_size),$(mtd_wcr150gn_rootfs_part_size))
-endef
-
define Image/Build/Profile/WCR150GN
- $(call Image/Build/Template/WCR150GN,$(1),wcr150gn,WCR150GN)
+ $(call Image/Build/Template/GENERIC_4M,$(1),wcr150gn,WCR150GN)
endef
Index: target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
===================================================================
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
(revision 28717)
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
(working copy)
@@ -55,7 +55,7 @@
nw718 | \
rt-n15 | \
v22rw-2x2 | \
- wcr150gn | \
+ wcr-150gn | \
whr-g300n | \
wr512-3gn)
rt2x00_eeprom_extract "factory" 0 272
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
