This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio, it got 8MB
of NOR and 32MB SDRAM.
Signed-off-by: Daniel Golle <dgo...@allnet.de>
Index: target/linux/ar71xx/files/arch/mips/ar71xx/mach-all0258n.c
===================================================================
--- target/linux/ar71xx/files/arch/mips/ar71xx/mach-all0258n.c (revision 0)
+++ target/linux/ar71xx/files/arch/mips/ar71xx/mach-all0258n.c (revision 0)
@@ -0,0 +1,157 @@
+/*
+ * Allnet ALL0258N support
+ *
+ * Copyright (C) 2011 Daniel Golle <dgo...@allnet.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+
+/* found via /sys/gpio/... try and error */
+#define ALL0258N_GPIO_BTN_RESET 1
+#define ALL0258N_GPIO_LED_RSSIHIGH 13
+#define ALL0258N_GPIO_LED_RSSIMEDIUM 15
+#define ALL0258N_GPIO_LED_RSSILOW 14
+
+/* defaults taken from others machs */
+#define ALL0258N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ALL0258N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0258N_KEYS_POLL_INTERVAL)
+
+/* showed up in the original firmware's bootlog */
+#define ALL0258N_LAN_PHYMASK BIT(4)
+#define ALL0258N_SEC_PHYMASK BIT(3)
+
+/* vendor provided info */
+#define ALL0258N_FIFO_CFG1 0x10ffff
+#define ALL0258N_FIFO_CFG2 0x015500aa
+#define ALL0258N_FIFO_CFG3 0x01f00140
+
+/*
+ * from U-Boot bootargs of original firmware:
+ *
mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),320k(custom),1024k(kernel),4928k(rootfs),1536k(failsafe),64k(ART)
+ * we use a more OpenWrt-friendly layout now:
+ *
mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),896k(kernel),5376k(rootfs),1536k(failsafe),64k(ART)
+ */
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition all0258n_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x040000,
+ .size = 0x010000,
+ }, {
+ .name = "kernel",
+ .offset = 0x050000,
+ .size = 0x0E0000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x130000,
+ .size = 0x540000,
+ }, {
+ .name = "failsafe",
+ .offset = 0x670000,
+ .size = 0x180000,
+ }, {
+ .name = "firmware",
+ .offset = 0x050000,
+ .size = 0x630000,
+ }, {
+ .name = "art",
+ .offset = 0x7F0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data all0258n_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+ .parts = all0258n_partitions,
+ .nr_parts = ARRAY_SIZE(all0258n_partitions),
+#endif
+};
+
+static struct gpio_led all0258n_leds_gpio[] __initdata = {
+ {
+ .name = "all0258n:green:rssihigh",
+ .gpio = ALL0258N_GPIO_LED_RSSIHIGH,
+ .active_low = 1,
+ }, {
+ .name = "all0258n:yellow:rssimedium",
+ .gpio = ALL0258N_GPIO_LED_RSSIMEDIUM,
+ .active_low = 1,
+ }, {
+ .name = "all0258n:red:rssilow",
+ .gpio = ALL0258N_GPIO_LED_RSSILOW,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button all0258n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ALL0258N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ALL0258N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init all0258n_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f7f0000);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1f7f1000);
+
+ ar71xx_add_device_m25p80(&all0258n_flash_data);
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(all0258n_leds_gpio),
+ all0258n_leds_gpio);
+
+ ar71xx_register_gpio_keys_polled(-1, ALL0258N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(all0258n_gpio_keys),
+ all0258n_gpio_keys);
+
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 0);
+
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth0_data.phy_mask = ALL0258N_LAN_PHYMASK;
+ ar71xx_eth0_data.fifo_cfg1 = ALL0258N_FIFO_CFG1;
+ ar71xx_eth0_data.fifo_cfg2 = ALL0258N_FIFO_CFG2;
+ ar71xx_eth0_data.fifo_cfg3 = ALL0258N_FIFO_CFG3;
+
+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth1_data.phy_mask = ALL0258N_SEC_PHYMASK;
+ ar71xx_eth1_data.fifo_cfg1 = ALL0258N_FIFO_CFG1;
+ ar71xx_eth1_data.fifo_cfg2 = ALL0258N_FIFO_CFG2;
+ ar71xx_eth1_data.fifo_cfg3 = ALL0258N_FIFO_CFG3;
+ ar71xx_eth1_data.has_ar7240_switch = 1;
+
+ ar71xx_add_device_mdio(0x0);
+
+ ar71xx_add_device_eth(0);
+ ar71xx_add_device_eth(1);
+
+ ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(AR71XX_MACH_ALL0258N, "ALL0258N", "Allnet ALL0258N",
+ all0258n_setup);
Index: target/linux/ar71xx/files/arch/mips/ar71xx/Makefile
===================================================================
--- target/linux/ar71xx/files/arch/mips/ar71xx/Makefile (revision 28191)
+++ target/linux/ar71xx/files/arch/mips/ar71xx/Makefile (working copy)
@@ -28,6 +28,7 @@
obj-$(CONFIG_AR71XX_NVRAM) += nvram.o
obj-$(CONFIG_AR71XX_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o
+obj-$(CONFIG_AR71XX_MACH_ALL0258N) += mach-all0258n.o
obj-$(CONFIG_AR71XX_MACH_AP121) += mach-ap121.o
obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o
obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o
Index: target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
===================================================================
--- target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h (revision 28191)
+++ target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h (working copy)
@@ -70,6 +70,7 @@
AR71XX_MACH_AP96, /* Atheros AP96 */
AR71XX_MACH_UBNT_UNIFI, /* Unifi */
AR71XX_MACH_DB120, /* Atheros DB120 (AR934x based) */
+ AR71XX_MACH_ALL0258N, /* Allnet ALL0258N */
};
#endif /* _AR71XX_MACHTYPE_H */
Index: target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig
===================================================================
--- target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig (revision 28191)
+++ target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig (working copy)
@@ -351,6 +359,14 @@
select AR71XX_DEV_LEDS_GPIO
default n
+config AR71XX_MACH_ALL0258N
+ bool "Allnet ALL0258N support"
+ select SOC_AR724X
+ select AR71XX_DEV_M25P80
+ select AR71XX_DEV_AP91_PCI if PCI
+ select AR71XX_DEV_GPIO_BUTTONS
+ select AR71XX_DEV_LEDS_GPIO
+ default n
endmenu
config SOC_AR71XX
Index: target/linux/ar71xx/config-2.6.39
===================================================================
--- target/linux/ar71xx/config-2.6.39 (revision 28191)
+++ target/linux/ar71xx/config-2.6.39 (working copy)
@@ -13,6 +14,7 @@
CONFIG_AR71XX_DEV_PB42_PCI=y
CONFIG_AR71XX_DEV_PB9X_PCI=y
CONFIG_AR71XX_DEV_USB=y
+CONFIG_AR71XX_MACH_ALL0258N=y
CONFIG_AR71XX_MACH_AP121=y
CONFIG_AR71XX_MACH_AP81=y
CONFIG_AR71XX_MACH_AP83=y
Index: target/linux/ar71xx/base-files/lib/ar71xx.sh
===================================================================
--- target/linux/ar71xx/base-files/lib/ar71xx.sh (revision 28191)
+++ target/linux/ar71xx/base-files/lib/ar71xx.sh (working copy)
@@ -10,6 +10,9 @@
machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}'
/proc/cpuinfo)
case "$machine" in
+ *ALL0258N)
+ name="all0258n"
+ ;;
*AP121)
name="ap121"
;;
Index: target/linux/ar71xx/image/Makefile
===================================================================
--- target/linux/ar71xx/image/Makefile (revision 28191)
+++ target/linux/ar71xx/image/Makefile (working copy)
@@ -675,11 +675,17 @@
$(call
Image/Build/Template/$(fs_64k)/$(1),Zcomax,zcn-1523h-5-16,$(zcn1523h516_cmdline))
endef
+all0258n_cmdline=board=ALL0258N console=ttyS0,115200
+define Image/Build/Profile/ALL0258N
+ $(call
Image/Build/Template/$(fs_64k)/$(1),AthLzma,all0258n,$(all0258n_cmdline),,917504,5505024,KR)
+endef
+
define Image/Build/Profile/Default
$(call Image/Build/Profile/AP121,$(1))
$(call Image/Build/Profile/AP121MINI,$(1))
$(call Image/Build/Profile/AP81,$(1))
$(call Image/Build/Profile/AP83,$(1))
+ $(call Image/Build/Profile/ALL0258N,$(1))
$(call Image/Build/Profile/A02RBW300N,$(1))
$(call Image/Build/Profile/DB120,$(1))
$(call Image/Build/Profile/DIR600A1,$(1))
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
