Hello Jason, On Wednesday 24 August 2011 08:03:43 jason duhamell wrote: > They tend to leave some proprietary bits out of the gpl releases. The least > I can do is ask around and see when the bsp was last updated and if so what > changes they made. I remember reading a guy got dd-wrt to boot on rtl8196, > perhaps that thread may help you in some way. > > I can also donate hardware to other serious devs that want to help andrew > in supporting rtl8196.
I would be interested by such hardware, can we arrange this off-list? Thank you very much. -- Florian > > Jason > > On Wed, Aug 24, 2011 at 1:57 PM, Andrew <aifil...@gmail.com> wrote: > > On Wed, 24 Aug 2011 13:43:33 +0800, jason duhamell <ps2chi...@gmail.com> > > > > wrote: > > > Hey Andrew, If you need hardware samples, let me know and I will > > > support you on the rtl8196. I can also get you the rtl8196 factory sdk > > > if you need it. > > > > > > Best Regards, Jason > > > > While now I think the hardware I have will do fine. And the bsp I have > > from > > the trendnet router has the 2.6.30.9 kernel, which, from what I got from > > a > > > > guy working on wive-ng firmware, (sfstduio.livejornal.com) is the latest > > one > > avaliable for this stuff. > > I guess, I'll need a different board or two when I come close to > > developing board support. > > Current symlink/bsp approach they have in the bsp sucks hard. > > But at the current state, I just want to make sure that OpenWRT actually > > boots > > for the first time on this hardware, before taking on any more boards. > > I'll post more results to the maillist as soon as possible. > > > > Thanks. > > > > Regards, > > Andrew > > _______________________________________________ > > openwrt-devel mailing list > > openwrt-devel@lists.openwrt.org > > https://lists.openwrt.org/mailman/listinfo/openwrt-devel -- Florian _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
