Hi Gert, The dot1ag-utils software package are the user space utilities to configure CFM OAM and provide support to send various OAM PDUs such as Connectivity Control Messages, Loop Back messages and Link Trace messages etc. But as far I could understand , for OAM protocols to be supported under linux, Linux networking stack does require support for OAM protocols. I am looking for that part of CFM OAM.
Thanks, Satendra On 1 July 2011 17:43, Gert Doering <g...@greenie.muc.de> wrote: > Hi, > > On Fri, Jul 01, 2011 at 05:21:45PM +0530, santosh wrote: >> I'm not aware if there is any open source implementation of 802.1ag. >> I hope someone with the correct knowledge will respond to you. >> Good luck. > > Googling leads to... > > https://noc.sara.nl/nrg/dot1ag-utils/index.html > > "The IEEE 802.1ag standard is a set of protocols for Ethernet OAM > (Operations, Administration, and Management). The dot1ag-utils > software package is an Open Source (new BSD License) implementation > of the IEEE 802.1ag protocol and is supported on Linux, FreeBSD > and MacOSX server" > > > Wasn't *that* particularily hard to find. > > gert > > -- > USENET is *not* the non-clickable part of WWW! > //www.muc.de/~gert/ > Gert Doering - Munich, Germany g...@greenie.muc.de > fax: +49-89-35655025 g...@net.informatik.tu-muenchen.de > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel > > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
