Use preconfigured files rather than uci-defaults.
Signed-off-by: Philip Prindeville <phil...@redfish-solutions.com>
Index: target/linux/x86/geos/base-files/etc/uci-defaults/ppp =================================================================== --- target/linux/x86/geos/base-files/etc/uci-defaults/ppp (revision 27156) +++ target/linux/x86/geos/base-files/etc/uci-defaults/ppp (working copy) @@ -1,23 +0,0 @@ -#!/bin/sh - -uci batch <<__EOF__ - -delete network.wan - -set network.wan=interface -set network.wan.proto='pppoa' -set network.wan.atmdev=0 -set network.wan.card=0 -set network.wan.vpi=0 -set network.wan.vci=32 -set network.wan.encaps='vc' -set network.wan.username='usern...@myisp.net' -set network.wan.password='password' -set network.wan.keepalive=3 -set network.wan.defaultroute=1 -set network.wan.peerdns=1 -set network.wan.pppd_options='kdebug 1 debug noccp' -set network.wan.auto=1 - -commit network -__EOF__ Index: target/linux/x86/geos/base-files/etc/uci-defaults/network =================================================================== --- target/linux/x86/geos/base-files/etc/uci-defaults/network (revision 27156) +++ target/linux/x86/geos/base-files/etc/uci-defaults/network (working copy) @@ -1,16 +0,0 @@ -#!/bin/sh - -uci batch <<__EOF__ - -delete network.lan - -set network.lan=interface -set network.lan.type=bridge -set network.lan.ifname="eth0 eth1" -set network.lan.proto=static -set network.lan.ipaddr="192.168.1.1" -set network.lan.netmask="255.255.255.0" -set network.lan.nat=1 - -commit network -__EOF__ Index: target/linux/x86/geos/base-files/etc/config/network =================================================================== --- target/linux/x86/geos/base-files/etc/config/network (revision 0) +++ target/linux/x86/geos/base-files/etc/config/network (revision 0) @@ -0,0 +1,44 @@ +# Copyright (C) 2011 OpenWrt.org + +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname "eth0 eth1" + option type bridge + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 + +config atm-bridge + option unit 0 + option atmdev 0 + option vpi 0 + option vci 35 + option encaps llc + option payload bridged + option sendsize 2040 + +config interface wan + option proto dhcp + option ifname nas0 + # clone your eth0 address here + # option macaddr '00:0A:FA:22:00:80' + +# 2nd interface on Geos2 +#config interface wan +# option proto pppoa +# option atmdev 1 +# option vpi 8 +# option vci 32 +# option encaps vc +# option username 'usern...@myisp.net' +# option password 'password' +# option keepalive 3 +# option defaultroute 1 +# option peerdns 1 +# option pppd_options 'kdebug 1 debug noccp' +
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
