On 2011-04-20 4:16 PM, Jeroen Avonts wrote:
Hey,
I'm testing the following setup with the svn backfire (18/04/2011 rev 26713).
I have an access point (192.168.1.253) configured with hostapd using the
following configuration:
interface=wlan0
bridge=br0
driver=nl80211
auth_algs=3
debug=0
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
dump_file=/tmp/hostapd.dump
beacon_int=100
max_num_sta=255
hw_mode=a
ieee80211n=1
wmm_enabled=1
ieee80211n=1
wmm_enabled=1
ht_capab=[TX-STBC][RX-STBC12][DELAYED-BA][MAX-AMSDU-7935]
channel=48
rts_threshold=2347
fragm_threshold=2346
ssid=ntest
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ignore_broadcast_ssid=0
Did you add any modifications to the driver and/or hostapd? Because the
ht capabilities contain features that are unsupported by both hardware
and software, and when I put them in a config on my device for testing,
hostapd rightfully refuses them.
- Felix
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
