Yes, I am using the backfire version and will report my finding once I do it.
On Fri, Apr 8, 2011 at 11:00 PM, Jonas Gorski < jonas.gorski+open...@gmail.com> wrote: > On 6 April 2011 16:18, Yeoh Chun Yeow <yeohchuny...@gmail.com> wrote: > > Hi, Jonas, > > UBNT RS has two ports connected to eth1, port 0 and port 1. If you > connect > > your Ethernet cable to port 0 without first connecting Ethernet cable to > > port 1, it won't work. You will see a lot of messages "Trying 100/FULL, > > Trying 10/HALF, Trying 10/HALF". Once you connect port 1 with Ethernet > > cable, you will only see the message "eth1: link up (100Mbps/Full > duplex)" > > and the port 0 will function properly. > > Do you know why? > > After looking at the code several times, I have an Idea. Can you try > the attached patch? It should apply to backfire (assuming you are > using it), but is generated against trunk with the ADM6996 patch > applied. > > Regards > Jonas >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
