I have some log snips below from a WNDR3700v2. I'm curious what is causing
the following errors, it seems to happen one time and never again.
This is from r26504:
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: Invalid
argument
Mar 27 02:54:00 OpenWrt user.info sysinit: We have an error talking to the
kernel
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: Invalid
argument
Mar 27 02:54:00 OpenWrt user.info sysinit: We have an error talking to the
kernel
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: Invalid
argument
Mar 27 02:54:00 OpenWrt user.info sysinit: We have an error talking to the
kernel
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: Invalid
argument
Mar 27 02:54:00 OpenWrt user.info sysinit: We have an error talking to the
kernel
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: Invalid
argument
Mar 27 02:54:00 OpenWrt user.info sysinit: We have an error talking to the
kernel
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: No such file
or directory
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: Invalid
argument
Mar 27 02:54:00 OpenWrt user.info sysinit: We have an error talking to the
kernel
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: Invalid
argument
Mar 27 02:54:00 OpenWrt user.info sysinit: We have an error talking to the
kernel
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: Invalid
argument
Mar 27 02:54:00 OpenWrt user.info sysinit: We have an error talking to the
kernel
Mar 27 02:54:00 OpenWrt user.info sysinit: RTNETLINK answers: Invalid
argument
Mar 27 02:54:00 OpenWrt user.info sysinit: We have an error talking to the
kernel
Mar 27 02:54:00 OpenWrt user.notice ifup: Allowing Router Advertisements on
wan (eth1)
dmesg follows:
Linux OpenWRT 2.6.37.6 #1 Wed Apr 6 23:51:41 CDT 2011 mips GNU/Linux
root@gate:~# dmesg
Linux version 2.6.37.6 (wrtdev@openwrt-dev) (gcc version 4.3.3 (GCC) ) #1
Wed Apr 6 23:51:41 CDT 2011
prom: fw_arg0=00000006, fw_arg1=a3f6bfb0, fw_arg2=a3f6c450, fw_arg3=00000010
MyLoader: sysp=aaaa5554, boardp=aaaa5554, parts=aaaa5554
bootconsole [early0] enabled
CPU revision is: 00019374 (MIPS 24Kc)
Atheros AR7161 rev 2, CPU:680.000 MHz, AHB:170.000 MHz, DDR:340.000 MHz
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00004000
On node 0 totalpages: 16384
free_area_init_node: node 0, pgdat 802c3460, node_mem_map 81000000
Normal zone: 128 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 16256 pages, LIFO batch:3
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: board=WNDR3700v2
mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,1024k(kernel),14848k(rootfs),64k(art)ro,15872k@0x70000(firmware)
rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 61764k/65536k available (2071k kernel code, 3772k reserved, 374k
data, 176k init, 0k highmem)
SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:56
Calibrating delay loop... 452.19 BogoMIPS (lpj=2260992)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is NETGEAR WNDR3700v2
registering PCI controller with io_map_base unset
bio: create slab <bio-0> at 0
pci 0000:00:00.0: [0700:1107] type 0 class 0x000000
pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0fffffff pref]
pci 0000:00:00.0: reg 14: [io 0x0000-0x00ff]
pci 0000:00:00.0: supports D1 D2
pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:00.0: PME# disabled
pci 0000:00:11.0: [168c:ff1d] type 0 class 0x000200
pci 0000:00:11.0: fixup device configuration
pci 0000:00:11.0: reg 10: [mem 0x00000000-0x0000ffff]
pci 0000:00:11.0: PME# supported from D0 D3hot
pci 0000:00:11.0: PME# disabled
pci 0000:00:12.0: [168c:ff1d] type 0 class 0x000200
pci 0000:00:12.0: fixup device configuration
pci 0000:00:12.0: reg 10: [mem 0x00000000-0x0000ffff]
pci 0000:00:12.0: PME# supported from D0 D3hot
pci 0000:00:12.0: PME# disabled
pci 0000:00:11.0: BAR 0: assigned [mem 0x10000000-0x1000ffff]
pci 0000:00:11.0: BAR 0: set to [mem 0x10000000-0x1000ffff] (PCI address
[0x10000000-0x1000ffff])
pci 0000:00:12.0: BAR 0: assigned [mem 0x10010000-0x1001ffff]
pci 0000:00:12.0: BAR 0: set to [mem 0x10010000-0x1001ffff] (PCI address
[0x10010000-0x1001ffff])
PCI: mapping irq 48 to pin1@0000:00:11.0
PCI: mapping irq 49 to pin1@0000:00:12.0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
PCI: CLS 0 bytes, default 32
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c)
2001-2006 Red Hat, Inc.
msgmni has been set to 120
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
console [ttyS0] enabled, bootconsole disabled
Atheros AR71xx SPI Controller driver version 0.2.4
m25p80 spi0.0: found mx25l12805d, expected m25p80
m25p80 spi0.0: mx25l12805d (16384 Kbytes)
6 cmdlinepart partitions found on MTD device spi0.0
Creating 6 MTD partitions on "spi0.0":
0x000000000000-0x000000050000 : "u-boot"
0x000000050000-0x000000070000 : "u-boot-env"
0x000000070000-0x000000170000 : "kernel"
0x000000170000-0x000000ff0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=870000, len=780000
0x000000870000-0x000000ff0000 : "rootfs_data"
0x000000ff0000-0x000001000000 : "art"
0x000000070000-0x000000ff0000 : "firmware"
Realtek RTL8366S ethernet switch driver version 0.2.2
rtl8366s rtl8366s: using GPIO pins 5 (SDA) and 7 (SCK)
rtl8366s rtl8366s: RTL8366 ver. 1 chip found
rtl8366s: probed
eth0: Atheros AG71xx at 0xb9000000, irq 4
eth0: using fixed link parameters
eth1: Atheros AG71xx at 0xba000000, irq 5
eth1: connected to PHY at rtl8366s:04 [uid=001cc960, driver=Realtek
RTL8366S]
Atheros AR71xx hardware watchdog driver version 0.1.0
ar71xx-wdt: timeout=15 secs (max=25)
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <gree...@candelatech.com>
All bugs added by David S. Miller <da...@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Freeing unused kernel memory: 176k freed
input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Button Hotplug driver version 0.4.1
ar71xx: pll_reg 0xb8050010: 0x11110000
eth0: link up (1000Mbps/Full duplex)
Registered led device: wndr3700:green:power
Registered led device: wndr3700:orange:power
Registered led device: wndr3700:green:wps
Registered led device: wndr3700:orange:wps
Registered led device: wndr3700:green:wan
eth0: link down
ar71xx: pll_reg 0xb8050010: 0x11110000
eth0: link up (1000Mbps/Full duplex)
device eth0.1 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.1) entering forwarding state
br-lan: port 1(eth0.1) entering forwarding state
Compat-wireless backport release: compat-wireless-2011-01-31-26-gf7606f5
Backport based on wireless-testing.git master-2011-03-24
cfg80211: Calling CRDA to update world regulatory domain
SCSI subsystem initialized
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Enabling device 0000:00:11.0 (0000 -> 0002)
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: ath9k-phy0
ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=48
PCI: Enabling device 0000:00:12.0 (0000 -> 0002)
ath: eeprom contains invalid mac address: ff:ff:ff:ff:ff:ff
ath: random mac address will be used: e2:14:7e:6a:0d:28
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Registered led device: ath9k-phy1
ieee80211 phy1: Atheros AR9280 Rev:2 mem=0xb0010000, irq=49
cfg80211: Calling CRDA for country: US
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ar71xx-ehci ar71xx-ehci: Atheros AR71xx built-in EHCI controller
ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
nf_conntrack version 0.5.0 (967 buckets, 3868 max)
xt_time: kernel timezone is -0000
nf_conntrack_rtsp v0.6.21 loading
nf_nat_rtsp v0.6.21 loading
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ar71xx-ohci ar71xx-ohci: Atheros AR71xx built-in OHCI controller
ar71xx-ohci ar71xx-ohci: new USB bus registered, assigned bus number 2
ar71xx-ohci ar71xx-ohci: irq 14, io mem 0x1c000000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Registered led device: wndr3700:green:usb
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
jffs2_build_filesystem(): unlocking the mtd device... done.
jffs2_build_filesystem(): erasing all blocks after the end marker... done.
JFFS2 notice: (1633) jffs2_build_xattr_subsystem: complete building xattr
subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0
orphan) found.
ar71xx-wdt: enabling watchdog timer
ar71xx: pll_reg 0xb8050014: 0x11110000
eth1: link up (1000Mbps/Full duplex)
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
