This is for an r26418 image generated locally for the Ubiquiti M900 series.
The signal strength forecast by Radio Mobile is -68 dBm. The path is
2 Km. Clearly, there is one tree in the Fresnel zone; if wrong about
the Fresnel zone, the worst case is 300 meters of trees without much
foliage this time of year.
Presuming this is a noise problem, is there a sw tool which will
provide us with the manufacturer|mac address of the device which may
be causing the noise?
The two measurements below were taken 5 to 10 minutes apart.
What possibilities exist other than noise for such a poor signal strength?
THANKS for your help.
kind regards/ldv
--
Larry Vaden, CoFounder
Internet Texoma, Inc.
Serving Rural Texomaland Since 1995
We Care About Your Connection!
===Rocket M900 AP
root@OpenWrt:~# iw wlan0 survey dump
Survey data from wlan0
frequency: 2412 MHz
noise: -97 dBm
channel active time: 37 ms
channel busy time: 13 ms
channel receive time: 0 ms
channel transmit time: 0 ms
Survey data from wlan0
frequency: 2417 MHz
Survey data from wlan0
frequency: 2422 MHz
Survey data from wlan0
frequency: 2427 MHz
Survey data from wlan0
frequency: 2432 MHz [in use]
noise: -104 dBm
channel active time: 334750 ms
channel busy time: 67217 ms
channel receive time: 3326 ms
channel transmit time: 438 ms
Survey data from wlan0
frequency: 2437 MHz
Survey data from wlan0
frequency: 2442 MHz
Survey data from wlan0
frequency: 2447 MHz
Survey data from wlan0
frequency: 2452 MHz
Survey data from wlan0
frequency: 2457 MHz
Survey data from wlan0
frequency: 2462 MHz
Survey data from wlan0
frequency: 2467 MHz
Survey data from wlan0
frequency: 2472 MHz
Survey data from wlan0
frequency: 2484 MHz
root@OpenWrt:~#
root@OpenWrt:~# iw wlan0 survey dump
Survey data from wlan0
frequency: 2412 MHz
noise: -97 dBm
channel active time: 37 ms
channel busy time: 13 ms
channel receive time: 0 ms
channel transmit time: 0 ms
Survey data from wlan0
frequency: 2417 MHz
Survey data from wlan0
frequency: 2422 MHz
Survey data from wlan0
frequency: 2427 MHz
Survey data from wlan0
frequency: 2432 MHz [in use]
noise: -111 dBm
channel active time: 1096688 ms
channel busy time: 205517 ms
channel receive time: 9205 ms
channel transmit time: 1250 ms
Survey data from wlan0
frequency: 2437 MHz
Survey data from wlan0
frequency: 2442 MHz
Survey data from wlan0
frequency: 2447 MHz
Survey data from wlan0
frequency: 2452 MHz
Survey data from wlan0
frequency: 2457 MHz
Survey data from wlan0
frequency: 2462 MHz
Survey data from wlan0
frequency: 2467 MHz
Survey data from wlan0
frequency: 2472 MHz
Survey data from wlan0
frequency: 2484 MHz
root@OpenWrt:~#
===Ubiquiti Loco M900 CPE/STA
root@OpenWrt:~# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"OpenWrt"
Mode:Managed Frequency:2.432 GHz Access Point: 00:15:6D:4E:F1:46
Bit Rate=1 Mb/s Tx-Power=27 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=9/70 Signal level=-101 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:16 Invalid misc:24 Missed beacon:0
root@OpenWrt:~#
root@OpenWrt:~# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"OpenWrt"
Mode:Managed Frequency:2.432 GHz Access Point: 00:15:6D:4E:F1:46
Bit Rate=11 Mb/s Tx-Power=27 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=9/70 Signal level=-101 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:117 Invalid misc:436 Missed beacon:0
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
