Hi Peter, i just dug out a board with the I version and wanted to also run the test script on this type.
could oyu resent the all in one patch to the list so patchwork grabs the full version, currently only the fix is listed in patchwork http://patchwork.midlink.org/patch/576/ thx, John On 01/04/11 11:57, Peter Lebbing wrote: > On 01/04/11 11:52, Yeoh Chun Yeow wrote: > >> Don't think that VLAN tagging is working. >> >> TCP dump results are shown below: >> >> # tcpdump -eni eth2 >> tcpdump: verbose output suppressed, use -v or -vv for full protocol decode >> listening on eth2, link-type EN10MB (Ethernet), capture size 96 bytes >> 19:00:21.462159 00:15:6d:c3:81:b1 > ff:ff:ff:ff:ff:ff, ethertype ARP >> (0x0806), length 60: arp who-has 192.168.1.2 tell 192.168.1.1 >> > Correct, those are untagged packets. That's disappointing. > > A tagged packet would show as: > > 11:55:09.468853 00:80:5a:24:89:b0 > 00:21:85:10:22:b2, ethertype 802.1Q > (0x8100), length 64: vlan 2, p 0, ethertype ARP, Reply 10.0.1.1 is-at > 00:80:5a:24:89:b0, length 46 > > Peter. > > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
