This patch adds support for D-Link's DVA-G3810BN/TL product.
Signed-off-by: Roman Dumycz <ro...@secureas.com>
Index: network
===================================================================
--- network (revision 0)
+++ network (revision 0)
@@ -0,0 +1,29 @@
+# Copyright (C) 2008 OpenWrt.org
+
+config interface loopback
+ option ifname lo
+ option proto static
+ option ipaddr 127.0.0.1
+ option netmask 255.0.0.0
+
+config interface lan
+ option type bridge
+ option ifname eth1.1
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
+ option nat 1
+
+config interface wan
+ option ifname eth0
+ option proto dhcp
+
+config switch eth1
+ option enable 1
+ option enable_vlan 1
+ option reset 1
+
+config switch_vlan
+ option vlan 1
+ option device eth1
+ option ports "0 1 2 3 5t"
Index: target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network
===================================================================
--- target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network
(revision 0)
+++ target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network
(revision 0)
@@ -0,0 +1,29 @@
+# Copyright (C) 2008 OpenWrt.org
+
+config interface loopback
+ option ifname lo
+ option proto static
+ option ipaddr 127.0.0.1
+ option netmask 255.0.0.0
+
+config interface lan
+ option type bridge
+ option ifname eth1.1
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
+ option nat 1
+
+config interface wan
+ option ifname eth0
+ option proto dhcp
+
+config switch eth1
+ option enable 1
+ option enable_vlan 1
+ option reset 1
+
+config switch_vlan
+ option vlan 1
+ option device eth1
+ option ports "0 1 2 3 5t"
Index: network
===================================================================
--- network (revision 0)
+++ network (revision 0)
@@ -0,0 +1,29 @@
+# Copyright (C) 2008 OpenWrt.org
+
+config interface loopback
+ option ifname lo
+ option proto static
+ option ipaddr 127.0.0.1
+ option netmask 255.0.0.0
+
+config interface lan
+ option type bridge
+ option ifname eth1.1
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
+ option nat 1
+
+config interface wan
+ option ifname eth0
+ option proto dhcp
+
+config switch eth1
+ option enable 1
+ option enable_vlan 1
+ option reset 1
+
+config switch_vlan
+ option vlan 1
+ option device eth1
+ option ports "0 1 2 3 5t"
Index: target/linux/brcm63xx/image/Makefile
===================================================================
--- target/linux/brcm63xx/image/Makefile (revision 26213)
+++ target/linux/brcm63xx/image/Makefile (working copy)
@@ -176,6 +176,8 @@
$(call Image/Build/CFE,$(1),D-4P-W,6348,DSL2640B)
# D-Link DSL-2740B/DSL-2741B, rev C2
$(call Image/Build/CFE,$(1),96358GW,6358,DSL274XB-C2)
+ # D-Link DVA-G3810BN/TL
+ $(call Image/Build/CFE,$(1),96358GW,6358,DVAG3810BN)
# TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
$(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811)
Index: target/linux/brcm63xx/base-files/etc/init.d/defconfig
===================================================================
--- target/linux/brcm63xx/base-files/etc/init.d/defconfig (revision 26213)
+++ target/linux/brcm63xx/base-files/etc/init.d/defconfig (working copy)
@@ -8,6 +8,10 @@
start() {
local board=$(awk 'BEGIN{FS="[ \t:/]+"} /system type/ {print $4}'
/proc/cpuinfo)
+ if [ "$board" = "96358VW" ] && [ -e /proc/switch/eth1/enable ]; then
+ board="DVAG3810BN"
+ fi
+
[ ! -d /etc/defconfig/$board ] && board="generic"
for f in $( ls /etc/defconfig/$board ); do
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
