Hi there, we tried to use 802.11r in hostapd for seamless roaming with mac80211 on TL-WR1043nd. Two access points are connected via cable. Wifi is open and the same channel is used. LAN and WLAN are bridged to br-lan.
I compiled the latest version of hostapd (v0.8.x) and wpa_supplicant full with the parameter CONFIG_IEEE80211R=y. The driver in the config-file is nl80211. When I move a client A from the 1st AP to the 2nd AP, the client A changes the connection when the SNR is good enough. A connection (e.g. ping) of another wireless client B from AP1 to client A in AP2 disconnects, so the roaming does not work. In hostapd.conf are various parameter for 802.11r, e.g. mobility_domain, r0kh or r1kh. I set these parameters as described but roaming doesn't work yet. How should FT / 802.11r work in this installation? Is there a hint for the configuration? thanks in advance, Stephan _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
