I'm trying to install trunk on a wl500pv2, but there is a kernel panic on startup.
This router works fine with backfire. I compared logs with the correct boot of backfire, but couldn't find any significative difference. I tried like a month ago, and it failed too, but until now I got the log. Don't know what was the revision # that broke this. Thanks in advance S.L. This are the last lines of the boot log: ... Looking for dual image Updating TRX offsets and length: old trx = [0x0000001c, 0x00000974, 0x000d0c00], len=0x00391000 crc32=0xdac85be6 new trx = [0x0000001c, 0x00000974, 0x000d0c00], len=0x000d0c00 crc32=0x63290fb3 Done Creating 4 MTD partitions on "Physically mapped flash": 0x000000000000-0x000000020000 : "cfe" 0x000000020000-0x0000007f0000 : "linux" 0x0000000f0c00-0x0000007f0000 : "rootfs" mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only mtd: partition "rootfs" set to be root filesystem mtd: partition "rootfs_data" created automatically, ofs=390000, len=460000 0x000000390000-0x0000007f0000 : "rootfs_data" 0x0000007f0000-0x000000800000 : "nvram" b44: b44.c:v2.0 b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00: BCM47xx Watchdog Timer enabled (30 seconds, nowayout) TCP westwood registered NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear <gree...@candelatech.com> All bugs added by David S. Miller <da...@redhat.com> VFS: Mounted root (squashfs filesystem) readonly on device 31:2. Freeing unused kernel memory: 148k freed mkdir: can't create directory '/dev/shm': Read-only file system mkdir: can't create directory '/dev/pts': Read-only file system mount: mounting devpts on /dev/pts failed: No such file or directory /etc/preinit: line 1: can't create /dev/null: Read-only file system /etc/preinit: line 1: can't open : no such file Kernel panic - not syncing: Attempted to kill init!
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
