Make the WiFi LEDs blink for activity on the WNDR3700, matching the stock firmware and user expectations. The green 2.4GHz and blue 5GHz LEDs will illuminate with the radio on, and will blink to indicate transmission and reception.
https://dev.openwrt.org/ticket/7984 Signed-off-by: Mark Mentovai <m...@moxienet.com> --- Index: target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700 =================================================================== --- target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700 (revision 23452) +++ target/linux/ar71xx/base-files/etc/uci-defaults/wndr3700 (working copy) @@ -7,16 +7,28 @@ board=$(ar71xx_board_name) -wndr3700_set_wan_led() { +wndr3700_set_wan_wifi_leds() { uci batch <<EOF -set system.wan_led=led +set system.wan_led='led' set system.wan_led.sysfs='wndr3700:green:wan' set system.wan_led.name='WAN LED (green)' set system.wan_led.default='0' +set system.wifi_led_2ghz='led' +set system.wifi_led_2ghz.sysfs='ath9k-phy0::radio' +set system.wifi_led_2ghz.name='2.4GHz WiFi LED (green)' +set system.wifi_led_2ghz.trigger='netdev' +set system.wifi_led_2ghz.dev='wlan0' +set system.wifi_led_2ghz.mode='link tx rx' +set system.wifi_led_5ghz='led' +set system.wifi_led_5ghz.sysfs='ath9k-phy1::radio' +set system.wifi_led_5ghz.name='5GHz WiFi LED (blue)' +set system.wifi_led_5ghz.trigger='netdev' +set system.wifi_led_5ghz.dev='wlan1' +set system.wifi_led_5ghz.mode='link tx rx' commit system EOF } if [ "${board}" == "wndr3700" ]; then - wndr3700_set_wan_led + wndr3700_set_wan_wifi_leds fi _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
