For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on the four LAN port switch LEDs. The LEDs will be lit to indicate a link and will blink to indicate activity. This matches the stock firmware and the description printed on the label on the unit's underside.
https://dev.openwrt.org/ticket/8103 Signed-off-by: Mark Mentovai <m...@moxienet.com> --- Index: target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network =================================================================== --- target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network (revision 23538) +++ target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network (working copy) @@ -32,16 +32,16 @@ # the switch and the section does not correspond to a real # switch port. # - # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3-1000MB/s - # 4=100 MB/s; 5=10 MB/s; 6=1000 MB/s+activity; 7=100 MB/s+activity - # 8=10 MB/s+activity; 9=10/100 Mb/s+activity; 10: Fiber; + # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s; + # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity; + # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber; # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx); # 14: Link (master); 15: separate register - + option device rtl8366s option port 1 - option led 9 - + option led 6 + config switch_port # Port 2 controls the ORANGE configuration of LEDs for # the switch and the section does not correspond to a real @@ -52,9 +52,8 @@ option device rtl8366s option port 2 - option led 6 + option led 9 - config switch_port # Port 5 controls the configuration of the WAN LED and the # section does not correspond to a real switch port. @@ -67,5 +66,4 @@ option device rtl8366s option port 5 - option led 6 - + option led 2 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
