Hello Miguel, Le Thursday 2 September 2010 12:16:19, Miguel GAIO a écrit : > Hi Florian, > > On Thu, 2010-09-02 at 10:40 +0200, Florian Fainelli wrote: > > Hi Miguel, > > > > On Thursday 02 September 2010 10:36:06 Miguel GAIO wrote: > > > Hi all, > > > > > > I have started the rewrite for the Broadcom BCM5325 switch. > > > It was test on neufbox4 board. > > > > This is great work! I will give it a try on a couple of BCM6348/38 boards > > and report to you how it goes. Might also be worth testing on BCM47xx > > and see if it works. > > Thanks for you tests. A bug was introduce in previous > 0001-Switch-add-support-for-Broadcom-BCM5325E-phy.patch. > Please use attached update.
I did not get it probing the switch, but I assume this is due to my wrong PHY mask. So far, I set it to 0xffffffff and tried with the same mask as the NB4 board, either without success. The old kmod-switch was able to detect the switch at PHY address 0, so I am not sure what is wrong here. The switch is a BCM5325E. > > > > It's not complete and does not support others Robo switches, comments > > > are welcome. > > > I can help for BCM5325 and BCM5395 support. > > > > > > Kind regards, > > > > > > Miguel > > > > -- > > Florian > > Miguel
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
